pUT LITHIUMS IN DOESN'T WORK!

[SwedishRacer]

i JUST PUT LITHIUMS IN AND THE SERVO IS LOUD WHEN I TURN, BUT THE MOTOR DOESNOT MOVE ATT ALL PLEASE HELP!!!!!!!!!!!

[SwedishRacer]

i bought a rc care kit at radio shack. the lube got onto the shaft and the piniuon keeps slipping back, it gets cuagth on the heatsink.

[viperdout]

Originally Posted by SwedishRacer

i bought a rc care kit at radio shack. the lube got onto the shaft and the piniuon keeps slipping back, it gets cuagth on the heatsink.

Then the heatsink is not in properly. If it is, just use the yellow mount, since it's been discovered that the heatsink makes no difference if the motor is gonna blow from heat or not.

[blah]

the servo is fine. dont worry about that. The servo FETS are noticing a change in current because of higher voltage and it over shoots when you u turn and continuosuly trys to center itself.

Did you solder the li-Ons correctly? is the heat sink in right? check the wires, solders every where

[SwedishRacer]

I bougt the rc care kit at radio ****, and when i lubricated the gears, it got to the pinion gears on the motor, so i removed some of it and pushed the pinion out. now it works fine except i have to charge my lithiumss. it will take 2 hours, and here in south florida we are getting hit by a huricane!!