#1
|
|||
|
|||
z kiiler done !!
it's done....... Car taking apart and reworked all the plastic parts now the car sits level on both sides.list of parts
GPM parts knuckles, arms,cvd,bottom plate & stearing arm cvd shaved to fit MA-010 rims MA-010 board lowering kit full bearings AWD with carbonfiber shaft took all wobble out of wheels shaved bottom front gear box to make the stearing tighter |
#3
|
||||
|
||||
still the stock chassis? you could have at least shed a little weight off of it by removing the top cover, unless you are just trying to perfect the suspension and keep the rest of it as stock as possible
__________________
i hate long signatures.... |
#4
|
||||
|
||||
Bosco - have you noticed a reduction in the turning radius with the MA-01 board conversion? I converted an Xmod (Evo) over to an 01 IWavier board not too long ago and noticed wider turning radius - just curious.
Nice job on your conversion BTW - Xmods are an absolute blast with hobby-grade electronics! Thanks! Last edited by MarkM; 06-16-2010 at 02:20 PM.. |
#5
|
||||
|
||||
Looks great!
If your not going to reduce the weight you should at least go for a quick motor to get the weight moving. Where did you get the board from?
__________________
XMS Approved Service Provider I install FETs and do repairs on Xmods and Mini-Zs including the new 2.4Ghz ASF boards and MR-03s. |
#6
|
|||
|
|||
I have a Mini z MA-010 board in mine.When i had a traxxas controller the turns where nice but i sold that one and now i use a HPI one and it's not turning as good.So im going back to a traxxas one.For the chassis i left stock because i wanted stock with a better board in it.After stacking fets i'll get a faster motor for now im going with a PN AWD stock motor.
By adding the mini z board in it u get a better response in everything u will see and feel it. |
#8
|
|||
|
|||
Update fixed the sloppy steering.All i did was take off the plate that goes over the steering rod and sanded the middle till it was almost gone then sanded the side humps and kept test fitting.When i use to flip the car over and let the wheels spin the fronts would go left and right.Now they don't even move.For the front wheel wobble i used GPM knuckles bought wider bearings then took 1 white washer from the gpm knuckle and sand that thiner and kept test fitting.I have no play at all at the wheels.
|
#11
|
|||
|
|||
another update ordered Black GPM front & rear shock towers only front came in so far.Also bought the set of MA-010 wheels and bought a brand new 2.4 MA-010 board for it.All i have to do is buy the 2.4 radio and a BB motor.Also dyed the rear motor mount black....This car is so smooth it's amazing how a xmod can work if you take it apart and sand down and put together the rite way.new pics
|
#13
|
||||
|
||||
nice project man. its coming along awesome. have you got any pics with the body on? what about a dyno test?
Congratulations on your progress so far. keep it coming michael
__________________
PS3 gamer tag : OxG33K_BunNYxO Hardstyle Republic U.K "Now This Is Real Music" NoiseControllers Headhunterz |
#15
|
|||
|
|||
I will i just have to waite for the 2.4 controller.I got a good deal on a new 2.4 AWD board from someone on this forum.I was going to leave it AM but i wanted a 2.4 mini z so i said let me buy the board because have to get a 2.4radio for the MR-03 when i get it.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|