z kiiler done !!
 

it's done....... Car taking apart and reworked all the plastic parts now the car sits level on both sides.list of parts

GPM parts
knuckles, arms,cvd,bottom plate & stearing arm
cvd shaved to fit MA-010 rims
MA-010 board
lowering kit
full bearings
AWD with carbonfiber shaft
took all wobble out of wheels
shaved bottom front gear box to make the stearing tighter

Need to get a vid of it killing a mini-z. lol

still the stock chassis? you could have at least shed a little weight off of it by removing the top cover, unless you are just trying to perfect the suspension and keep the rest of it as stock as possible

Bosco - have you noticed a reduction in the turning radius with the MA-01 board conversion? I converted an Xmod (Evo) over to an 01 IWavier board not too long ago and noticed wider turning radius - just curious.

Nice job on your conversion BTW - Xmods are an absolute blast with hobby-grade electronics!

Thanks!

Looks great!

If your not going to reduce the weight you should at least go for a quick motor to get the weight moving.

Where did you get the board from?

I have a Mini z MA-010 board in mine.When i had a traxxas controller the turns where nice but i sold that one and now i use a HPI one and it's not turning as good.So im going back to a traxxas one.For the chassis i left stock because i wanted stock with a better board in it.After stacking fets i'll get a faster motor for now im going with a PN AWD stock motor.

By adding the mini z board in it u get a better response in everything u will see and feel it.

Thanks for the info, Bosco! I will have to experiment with different controllers ; - )

Update fixed the sloppy steering.All i did was take off the plate that goes over the steering rod and sanded the middle till it was almost gone then sanded the side humps and kept test fitting.When i use to flip the car over and let the wheels spin the fronts would go left and right.Now they don't even move.For the front wheel wobble i used GPM knuckles bought wider bearings then took 1 white washer from the gpm knuckle and sand that thiner and kept test fitting.I have no play at all at the wheels.

You should paint it pearl white IMO.

I put the 370Z body on it

another update ordered Black GPM front & rear shock towers only front came in so far.Also bought the set of MA-010 wheels and bought a brand new 2.4 MA-010 board for it.All i have to do is buy the 2.4 radio and a BB motor.Also dyed the rear motor mount black....This car is so smooth it's amazing how a xmod can work if you take it apart and sand down and put together the rite way.new pics

2.4 board have to put it in and waite for my 2.4 radio to come in

nice project man. its coming along awesome. have you got any pics with the body on? what about a dyno test?

Congratulations on your progress so far. keep it coming

michael

Looks good. Need to get a vid of it running when you get it all set up.

I will i just have to waite for the 2.4 controller.I got a good deal on a new 2.4 AWD board from someone on this forum.I was going to leave it AM but i wanted a 2.4 mini z so i said let me buy the board because have to get a 2.4radio for the MR-03 when i get it.

more pics ....This thing is so smooth can't waite to get the MA-010 front knuckles on when xxx comes back.