#1
|
||||
|
||||
switchblade chasis
are they worth to buy?
are they much better than stock? anything about them i want to learn reviews if you have them too.
__________________
i am looking for donations. nothing big, just a long driveshaft. check out my B/S/T: the last page has the items i still need.! :: http://www.xmodsource.com/forum/showthread.php?t=16005 PROJECT DRIFTER: http://www.xmodsource.com/forum/showthread.php?t=16043 |
#2
|
|||
|
|||
It looks cool, plus it gets rid of a lot of weight, giving you an advantage. Also, it has a low COG so your less likely to flip over during a fast tight turn.
__________________
Looking for ANYTHING to do with the RSX |
#3
|
||||
|
||||
ok thanks would these wheels work for drifting and what size am drifting wheels would they need? http://www.toyeast.com/v3/pdtdetail....t_id=A02100616
__________________
i am looking for donations. nothing big, just a long driveshaft. check out my B/S/T: the last page has the items i still need.! :: http://www.xmodsource.com/forum/showthread.php?t=16005 PROJECT DRIFTER: http://www.xmodsource.com/forum/showthread.php?t=16043 |
#4
|
||||
|
||||
it doesn't improve CG, but it's stiffer, translating into more response from the suspension and steering.
those would work, but you'll have to get wheel adapters from XI because they have no center slot. all iwaver, firelap, mini-z, and ridgeless xmod wheels use the same diameter tire. the wheels you posted are the narrow type.
__________________
|
#5
|
||||
|
||||
i am going to post a bst thread and see if theres anyone that wants to sell me those rims. i want them but i wanna see if i can get them cheaper.
__________________
i am looking for donations. nothing big, just a long driveshaft. check out my B/S/T: the last page has the items i still need.! :: http://www.xmodsource.com/forum/showthread.php?t=16005 PROJECT DRIFTER: http://www.xmodsource.com/forum/showthread.php?t=16043 |
#6
|
||||
|
||||
You realize you would have to take the chassis I just made you apart. So you'll need new zipties and stuff.
__________________
XXX FREE modding Service: http://www.xmodsource.com/forum/showthread.php?t=17800 PM me for a quote or any questions. HAPPY MODDING 100% Positive Itrader feedback http://www.xmodsource.com/forum/itrader.php?u=6901 |
#7
|
||||
|
||||
i will get them .. i hope. ill go buy some at home depot. what other "stuff" will i need?
__________________
i am looking for donations. nothing big, just a long driveshaft. check out my B/S/T: the last page has the items i still need.! :: http://www.xmodsource.com/forum/showthread.php?t=16005 PROJECT DRIFTER: http://www.xmodsource.com/forum/showthread.php?t=16043 |
#8
|
||||
|
||||
switch blades are definately worth the money, there so light, when i picted it up it felt like plastic, i actualy droped it jus to see if it made the rining sound metal does when it hits slomething, i know it was stupid, but it dint hurt it at all, again, its definately worth it.
__________________
Bayvillemodders member Project switchblade: 20% http://www.xmodsource.com/forum/showthread.php?t=16669 |
#9
|
||||
|
||||
it all depends on the switchblade that you buy and the hardware kit in my opinion. most of those switchblades you see are steel, they wind up being heavier than the stock plastic. if you can find one with the metal standoffs, grab it, because the nylon ones strip and they're the weakest point on the switchblade chassis. i would honesetly spend my money on alloy upper decks, alloy alloy arms, an alloy motor holder and an alloy rear Diff holder before i bought a a switchblade.
|
#10
|
||||
|
||||
suicide star- my goal is eventually to have full gpm/alloy and a switchblade. thank you.
i do not know what you mean by the quality and everyone i just mean a switchblade style. (i will probably get cf if i get one) where did you buy yours from where its "lighter than plastic" and made the "ringing sound" sorry , but im not looking for stilleto, i have a gen1 just a switchblade.
__________________
i am looking for donations. nothing big, just a long driveshaft. check out my B/S/T: the last page has the items i still need.! :: http://www.xmodsource.com/forum/showthread.php?t=16005 PROJECT DRIFTER: http://www.xmodsource.com/forum/showthread.php?t=16043 Last edited by DRFTKO; 02-01-2009 at 02:15 PM.. Reason: double post |
#12
|
||||
|
||||
where would i get the hardwear?
__________________
i am looking for donations. nothing big, just a long driveshaft. check out my B/S/T: the last page has the items i still need.! :: http://www.xmodsource.com/forum/showthread.php?t=16005 PROJECT DRIFTER: http://www.xmodsource.com/forum/showthread.php?t=16043 |
#13
|
||||
|
||||
well i checked out atomic mods, and couldn't find a hardwear package. maybe some parts from the stiletto hardware package would work, but idk. maybe go to your local lowes and search for some small parts...
__________________
i hate long signatures.... |
#15
|
|||
|
|||
__________________
Looking for ANYTHING to do with the RSX |
#16
|
||||
|
||||
^^^that says its only the top deck in the description
|
#17
|
||||
|
||||
ir says the whole thing. but i can get it for 28.95 on ebay.. from the same guy if you buy it in international. but the product is located in brooklyn.
would that be steel though?
__________________
i am looking for donations. nothing big, just a long driveshaft. check out my B/S/T: the last page has the items i still need.! :: http://www.xmodsource.com/forum/showthread.php?t=16005 PROJECT DRIFTER: http://www.xmodsource.com/forum/showthread.php?t=16043 |
#18
|
|||
|
|||
Wow, if its cheaper international buy it. Just check the shipping price.
__________________
Looking for ANYTHING to do with the RSX |
#20
|
||||
|
||||
Quote:
does that mean they are just going to suck? or just the hardwear is going to suck?
__________________
i am looking for donations. nothing big, just a long driveshaft. check out my B/S/T: the last page has the items i still need.! :: http://www.xmodsource.com/forum/showthread.php?t=16005 PROJECT DRIFTER: http://www.xmodsource.com/forum/showthread.php?t=16043 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|