#1
|
||||
|
||||
Motor/External Board Question.
I have a 19t handwound armature, what board/ external turbo would be able to handle that?
Thanks
__________________
|
#2
|
||||
|
||||
your best bet would be the stacked Nelly. Search stacked nelly on ebay as ph2t stopped making them. they are basically the only external turbos that I know of that are capable of sustaining prolonged(about 90% of your runtime) full throttle on a 19t.
If ou can't find one, try these: spider v4.0(best), v2.2(2nd best), spider v3.0(3rd best), or a tall(emphasis on tall) FET stack(last) if you can't get these then your xmod will fry the generation 1's tolerance is 45 turns or higher the evo's tolerance is 35 turns or higher 19t lacks a lot of torque btw. you'll have to take up around 2-3 tennis court lengths to get it to top speed(and your motor will run very hot) in contrast, a higher wind count would have more torque but less speed just for reference, a stock motor has 64t and the upgrade motor(stage 2) has 54t.
__________________
|
#3
|
||||
|
||||
ok also of i made a custom chassis, all gpm parts, could i drop a traxxas XL-5 Esc and tq tx and rx combo in and get a small nimh pack and cram that all in and run that 19t armature in a vented can with silver brushes and neo magnets?
Thanks
__________________
|
#4
|
||||
|
||||
Quote:
you might want to check your references. if your saying these are a stock tolerance your off. if a evo would handle 35 turn on stock fets why do you need at least 2x2 stack, but recommended 2x3 stack to run the chili? which is 35 turns.
__________________
Keep smiling, people will wonder what your up to. TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526 |
#5
|
||||
|
||||
that's a general tolerance. the chilli uses thicker wire.
the true tolerance is 33t of 34AWG wire. it's not stating the absolute tolerance. gen ones have a tolerance of 43t of 34AWG wire. does that clear it up? the chili has thicker wire so it pulls more current
__________________
Last edited by XMDrifter; 09-07-2008 at 09:31 PM.. |
#6
|
||||
|
||||
lol can somebody answer my question??
__________________
|
#8
|
||||
|
||||
lol no for the traxxas XL5 question haha
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|