123Vette
06-20-2007, 10:54 PM
Here is what you'll need.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00659.jpg
Step 1: First take the marker and mark the center of the flat area on the bumper.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00660.jpg
Step 2: Now drill a hole there with the smaller drill to start.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00661.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00662.jpg
Step 3: Now widen this hole the bigger one.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00663.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00664.jpg
Step 4:Now insert the gen 1 acel stub into the hole.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00665.jpg
You may have to do it this way depending on the height of the truck.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00667.jpg
Step 5: Now screw the lug nut onto the acel stub.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00668.jpg
And there you go.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00670.jpg
Here's how to do it on a hummer.
You will need.
http://s208.photobucket.com/albums/bb29/123Vette/DSC00688.jpg
Step 1 Hummer: Drill the reciver hole out with ONLY the sm. drill
http://s208.photobucket.com/albums/bb29/123Vette/DSC00676.jpg
http://s208.photobucket.com/albums/bb29/123Vette/DSC00677.jpg
Step 2 Hummer: Mark the back of the metal or plastic peice and drill it with the sm. drill ONLY.
http://s208.photobucket.com/albums/bb29/123Vette/DSC00682.jpg
http://s208.photobucket.com/albums/bb29/123Vette/DSC00684.jpg
Step 3 Hummer: Now attach this piece with a short screw and lug nut.
http://s208.photobucket.com/albums/bb29/123Vette/DSC00690.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00691-1.jpg
Now follow steps 1-5 as if this were a truck bumper!!
http://i208.photobucket.com/albums/bb29/123Vette/DSC00692.jpg
Here is my truck, i wired the trailer up with lights for a realist touch, the trailer is part of a
Wal-Mart Model (most people use this one)For mine i use a triangular piece of plastic to make it turn better, look better, and for a place to incoprerate a plug for the lights. In order to make it the way i did on my titan is very easy, just do that same thing 2 times once the bumper to the piece of plastic , but use a short screw so it is tighter and doesn't wigle around, and then 1 more time the plastic to trailer.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00672.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00673.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00674.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00659.jpg
Step 1: First take the marker and mark the center of the flat area on the bumper.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00660.jpg
Step 2: Now drill a hole there with the smaller drill to start.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00661.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00662.jpg
Step 3: Now widen this hole the bigger one.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00663.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00664.jpg
Step 4:Now insert the gen 1 acel stub into the hole.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00665.jpg
You may have to do it this way depending on the height of the truck.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00667.jpg
Step 5: Now screw the lug nut onto the acel stub.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00668.jpg
And there you go.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00670.jpg
Here's how to do it on a hummer.
You will need.
http://s208.photobucket.com/albums/bb29/123Vette/DSC00688.jpg
Step 1 Hummer: Drill the reciver hole out with ONLY the sm. drill
http://s208.photobucket.com/albums/bb29/123Vette/DSC00676.jpg
http://s208.photobucket.com/albums/bb29/123Vette/DSC00677.jpg
Step 2 Hummer: Mark the back of the metal or plastic peice and drill it with the sm. drill ONLY.
http://s208.photobucket.com/albums/bb29/123Vette/DSC00682.jpg
http://s208.photobucket.com/albums/bb29/123Vette/DSC00684.jpg
Step 3 Hummer: Now attach this piece with a short screw and lug nut.
http://s208.photobucket.com/albums/bb29/123Vette/DSC00690.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00691-1.jpg
Now follow steps 1-5 as if this were a truck bumper!!
http://i208.photobucket.com/albums/bb29/123Vette/DSC00692.jpg
Here is my truck, i wired the trailer up with lights for a realist touch, the trailer is part of a
Wal-Mart Model (most people use this one)For mine i use a triangular piece of plastic to make it turn better, look better, and for a place to incoprerate a plug for the lights. In order to make it the way i did on my titan is very easy, just do that same thing 2 times once the bumper to the piece of plastic , but use a short screw so it is tighter and doesn't wigle around, and then 1 more time the plastic to trailer.
http://i208.photobucket.com/albums/bb29/123Vette/DSC00672.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00673.jpg
http://i208.photobucket.com/albums/bb29/123Vette/DSC00674.jpg