TiTan

[nw~hummer]

got the truck today, needs lots of work..

its gunna be an offroader..


pics up later, any suggestions will be appreciated


btw if anyone knows where to get stock titan body parts let me know, thanks

[supraboi97]

If its going to be an off road tuck i would definately go with some aoshima swampers and a high torque motor for crawling.

[FloydfanYodaman]

i think i have some extras pm me

[nw~hummer]

pm sent

Originally Posted by supraboi97

If its going to be an off road tuck i would definately go with some aoshima swampers and a high torque motor for crawling.

i actually have some "monster truck" style tires im gunna use, if they dont work out im gettin aoshima's

[nw~hummer]

well i got the pics i took from the other night, are anyone else's titan's tire's way in the back, like hitting the back bumper.. i had to take it off... this is the same on both my chassis


slammed.. ok stock on slammed rims put on backwords lol


lifted


desert style


more posts of it, i have it raked like a drag truck now.. and i was thinkin of another way to do a desert style lift.. anyways it was gunna be an off roader but since its winter im just gunna set it up to drift in my kitchen lol or make it desert style and make some jumps








ok so what will it be??

new desert style?? tires way in the back


or raked for driftin and drivin fast in the kitchen

[FloydfanYodaman]

i like the baja look...and i would trade out the stock body pieces for the kit you have on it...pm me

[BulletsRain]

So its going to be an offroader right, or drifter? Because those are two different things....so... either way it will be a nice project.

[nw~hummer]

im gunna do baja style.. and i got something special planned, i might get another titan in the next couple days so its gunna get a make over lol

[nw~hummer]

ok guys i got some more pics, and i took the front bumper off, looks more desert style baja now.. im not gunna keep the extra battery tray in the bed was just thinkin maybe if i hooked it up it might drive twice as long LOL..

anyways i was planning on doing a tubed front bumper and a roof rack.. and i got something special I MIGHT DO but i dont know yet.. ill let you guys know what it is when i decide lol


new pics ~

my insperation


and my truck so far
















any tips on how to make a front bumper like the bullydog titan would be appreciated, also a good roof rack.. and how to make off road lights.. i know i seen a nissan frontier??? or something like that last year with off road lights



sorry for the crappy pics... but hey lol i got them..


all i have to work with so far lol, not the tools tho, those are just waht ive used so far

[BulletsRain]

Hmm.....does the titan normally tilt back like that? Or is it because of the battery tray in the back?
You might better off with just leaving the battery tray in the stock position.

[XMDrifter]

i think you should go with a complete lift.
or use lowering top arms with off road a-arms and really long top suspension screws for lots of travel. and make sure to sleeve the screw in something like slippery scotch tape so the suspension doesn't lock up.

think you can probably go back to using stock skirts or no skirts at all

stock hood probably would look more like the bullydog baja truck

black wheels
thick tire mod (c1v1c did a write up)

you can probably use paperclips and solder to make the bars and stuff

you can use bodykit packaging plastic to make the front and rear skid plates
and you can drill out the KC light bar and install CL led's in them (and splice them into the same power source as the regular lights. the foglights can probably be like a cut up KC light bar

the roof rack you can make from paperclips and solder

black out the grille and run 2 batt packs (same battery brand and type please) so that it has the same voltage but much higher mAh (Example: energizers:850 mAh packs x 2 = 1700mAh pack)
connect it black wire to black wire and red to red.

bajas have like, 1-2 feet of suspension travel after the subtraction of travel used to hold the truck up (droop) that means you have to have 1/2-1 inch of usable suspension travel, nw~.

[texan_idiot25]

Lookin good so far. Lift the rear a tad, black out the rims.

[amorton94]

does anyone read? everyone is saying use the stock body kit, even though he said he was looking to get the stock body kit. and he said he was going for a baja look, which explains the lifted front end. but it looks good so far. and do you still want me to send you pics of the way i mounted those tires on my truck?

[nw~hummer]

Thanks for the tips guys, ye i have another truck on the way im gunna use the body parts from.. and im gunna lift the rear a little with the off road a-arms, and no the batt tray doesnt make it tilt, its cuz its on stock suspension in the back with off road susp. in the front.. thats actually a second batt tray the stock one is still in its position...

[XMDrifter]

it might be that the only stock part you'd need would be the hood. you can go without skirts and bumpers adn it'll look right.
just cut off the extension

[scoter]

"desert style" is called "Cali Lean"

Nice truck!

[nw~hummer]

the fenders and side skirts are 1 piece, thats why there on there.. also i tried the 4x4 a arm thing and it was lower and wider with a camber issue. so im gunna use what i already had until i find another way.


also, i found out you cant do the articulation mod with a titan cuz the gear cover hit the bed, even when its stock, it really sucks lol

Originally Posted by scoter

"desert style" is called "Cali Lean"

Nice truck!

ye when i lived in vegas i noticed almost every truck is like that.. looks kinda weird but cool lol



~ changed my mind, im gunna lift the rear cuz when i do my special surprize it will look better

[amorton94]

if your special surprise is what i think it is, than it's not so special or a surprise you still want pics of the way i mounted my tires??

[FloydfanYodaman]

for roll bars you could use modified model parts trees...i still have stock bk pieces if you want

[nw~hummer]

ye i wanna see the tires plz, and FloydfanYodaman ill pm you tomorrow if i still want the parts, im getting another titan, but i still may want extra stock parts cuz i just dont like the look of the body kit really