Go Back   XmodSource.com > Miscellaneous > Miscellaneous RC's
Register FAQ Members List Calendar Gallery iTrader Today's Posts

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-30-2009, 12:10 PM
Stampedekid's Avatar
Stampedekid Stampedekid is offline
is here
 
Join Date: Mar 2007
Location: Long Island, New York
Posts: 2,297
Trader Rating: (1)
Send a message via AIM to Stampedekid Send a message via MSN to Stampedekid
Default Parkzone Ultra Micro P-51 RTF and BNF

RTF Specs:
Ultra-Micro P-51 RTF
Key Features
Completely assembled and flight ready
ParkZone 4-channel transmitter with Spektrum™ 2.4GHz DSM2™ technology
Fully proportional throttle, elevator, aileron and rudder
Spektrum 2.4GHz DSM2 AR6400 receiver - installed
3.7V 120mAh 14C Li-Po battery
Portable DC fast charger
8 AA batteries
Realistic paint and trim inspired by P-51D’s of the 118th Fighter Squadron
Optional landing gear with a steerable tail wheel
Specs
Wingspan:15.8 in (401mm)
Overall Length:14.3 in (363mm)
Flying Weight:1.22 oz (34.6 g)
Motor Size:8.5mm brushed motor (installed)
Radio: ParkZone with Spektrum 2.4GHz DSM2 and Spektrum AR6400 receiver - installed
Servos:Spektrum 1.5-gram (SPMAS2000)
CG (center of gravity):35mm from leading edge of wing at the fuselage
Prop Size:130mm x 70mm
Recommended Battery:3.7V 120mAh Li-Po (included)
Aileron:Fully proportional
Elevator:Fully proportional
Rudder:Fully proportional
Throttle:Fully proportional
Control Throw (Ailerons):High- 7mm up/down, Low- 5mm up/down
Control Throw (Elevator):High- 7mm up/down, Low- 5mm up/down
Control Throw (Rudder):High- 10mm left/right, Low- 6mm left/right
Charger: DC single-cell Li-Po (included)
Needed to Complete
The P-51D Mustang RTF comes out of the box completely assembled and flight ready with everything needed to fly. No additional equipment is needed.
http://www.horizonhobby.com/Products...ProdID=PKZ3600
http://www.amainhobbies.com/product_...Micro-P-51-RTF

BNF Specs:
Key Features
Fully proportional throttle, elevator, aileron and rudder
Realistic paint and trim inspired by P-51D’s of the 118th Fighter Squadron
Steerable tail wheel
Spektrum 2.4GHz DSM2 AR6400 receiver - installed
Requires a Spektrum™ 2.4GHz DSM2™ aircraft transmitter (sold separately)
3.7V 120mAh 14C Li-Po battery included
Portable DC fast charger included
Overview
The most successful fighter of WWII, the P-51D Mustang still thrills thousands today in air shows and air races around the world. Now anyone with a Spektrum or JR 2.4GHz DSM2™ aircraft transmitter can experience Mustang thrills with this 4-channel ultra-micro flyer that’s small enough to fly in the local gym or right in your very own backyard when winds are calm.

The Ultra-Micro P-51D Mustang can be up and flying in as little time as it takes you to charge its battery and bind it to your DSM2 transmitter. And it boasts features usually only found on much larger park flyers.
Specs
Wingspan:15.8 in (401mm)
Overall Length:14.3 in (363mm)
Flying Weight:1.22 oz (34.6 g)
Motor Size:8.5mm brushed motor (installed)
Radio:Spektrum AR6400 receiver (installed); transmitter required
Servos:Spektrum 1.5-gram (SPMAS2000)
CG (center of gravity):35mm from leading edge of wing at the fuselage
Prop Size:130mm x 70mm
Recommended Battery:3.7V 120mAh Li-Po (included)
Aileron:Fully proportional
Elevator:Fully proportional
Rudder:Fully proportional
Throttle:Fully proportional
Control Throw (Ailerons):High- 7mm up/down, Low- 5mm up/down
Control Throw (Elevator):High- 7mm up/down, Low- 5mm up/down
Control Throw (Rudder):High- 10mm left/right, Low- 6mm left/right
Charger: DC single-cell Li-Po (included)
Needed to Complete
A DSM2 compatible aircraft transmitter is required to complete your P-51D Mustang.
http://www.horizonhobby.com/Products...ProdID=PKZ3680
http://www.amainhobbies.com/product_...-51-Bind-N-Fly
Forget the Sukhoi I'm sure this is a plane me and many others will love! Though, I will be getting a BNF!
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3
Reply With Quote
 


Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.