xmods Lithium ion help!!!

[edgarsevo8]

i currently installed the stilleto chassi and lithium in my xmods evolution car, but when i go to turn on the remote nothing happens. like if there was no batteries in the car or sumthing alike. i already installed it in another xmod and its the same thing nothing happens. if anybody has any ideas of wat it can be i would really appreciate it.

[SkylineLvr]

First off, make sure you have the correct crystals in. Second, check your wiring and make sure the batteries are charged

[edgarsevo8]

there the correct crystals because i was using the car before i installed lithium and none of the wires came off while i was installing it plus the batteries are charged so i dont know wat else it could be

[SkylineLvr]

I would check all your wiring and make sure you have everything where they should be. I haven't done a lithium on an evo. I've only done them on the gen 1

[ling427ttvette]

Did you bypass your power switch or are you still using it? Do your lithiums have deans connectors on them to unplug them when not in use?

[edgarsevo8]

no i didnt bypass anything
all the wires are there except for the ones for the battery tray
but i soldered the other ones that substitute them
and yeah u can unplug them it has the connector when not in use

[SkylineLvr]

Make sure you got a good connection when you soldered the new battery wires to the ep. Make sure they are set up the correct way too. I didn't have a good connection on one of my Gen 1's and was having the same problem

[edgarsevo8]

yeah thats what im going to do
unsoldered them and soldered them back on the board again

[SkylineLvr]

Make sure you don't cross anything with solder. I think that's what I did to fry some fets on a couple of my gen 1 boards in the past. Good luck and keep us posted

[edgarsevo8]

thanks and yeah im going to check all the wiring
and hopefully ill get it to work