Li-Ion Charger help

[GearHeadV8]

Hey guys, I am about to receive a truck with Lithium batteries (2 AAs) and I have a Onyx230 charger that I use to charge my Lipos for my e-revos..

* A super-small, lightweight built-in AC power supply is great for cramped pit spaces, and easy portability.

* Fully adjustable charge currents from 100mA to 7 amps, with an auto-trickle function for NiCd and NiMH packs.

* A precise constant-current / constant-voltage charge algorithm safely fills lithium-polymer (LiPo), lithium-ion (Li-Ion), or lithium ferrite-phosphate (LiFe) batteries!

* A custom peak detection system loads NiCd and NiMH batteries full of power. Peak sensitivity can be adjusted to tailor the charger to the battery.

* Pushbutton controls and audible tones make for easy set-up and control.

* Configure up to 10 batteries in memory for instant, easy recall and set-up.

* A built-in cooling fan keeps components cool and extends life of charger.

* A backup safety timer automatically stops charge to prevent accidental battery overcharge.

* Large alligator clips on the DC input easily connect to most 12V DC power sources.

* Banana jacks on the output allow for connection with many commonly found charge adapters. An adapter with standard plug is included.

That is directly off its webpage. Can I use this with the Li-Ion cells safely if I got a dean plug adapter?

[mycrors4]

on duratrax's site about that charger i read the specs:
Specifications
AC input: 110V AC 60Hz
DC input: 11-15V DC, built-in lead with alligator clips
Battery types: 1-8 NiCd or NiMH cells (1.2-9.6V)
1-3 LiPo, Li-Ion, or LiFe cells (3.7-11.1V)
Battery capacity range: 50-9900mAh
Fast charge current: 0.1-7.0A linear, adjustable
(AC 50W, DC 70W, 2C limit for lithiums)
Fast charge termination: peak detection for NiCd/MH, cc/cv for lithiums
Fast charge safety timer: off-300 minutes
NiCd/MH peak sensitivity: 3-20mV adjustable
NiCd/MH trickle charge curent: auto mode (1/20 fast charge setting), or manual set 0-250mA
Controls: 4 pushbuttons
Battery memories: 10
Display type: 2x8 reversed LCD with backlight
Setup tones: on / off
Audible melodies: 5
Output connection: banana jacks (includes standard adapter)*
Protective devices: solid-state reverse polarity and current overload
Case size: 6.0 x 5.28 x 1.69" (153 x 134 x 43 mm)
Weight: 23.5 oz. (666 g)

your answer would be yes