|
|
|
#21
06-12-2007, 07:56 PM
|
||||
|
||||
Quote:
Quote:
Quote:
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen" 
|
|
#23
06-12-2007, 08:04 PM
|
||||
|
||||
|
meme, its the first pic on the page:
http://ripper7racing.com/vforums/sho...p?t=11&page=10 gl, sweed. My parts came today (2x4 FETs, 16 NiMh batteries, etc, etc) Later, RedSXmodder EDIT: 800th WOOT!!!
__________________
 Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
Last edited by RedSXmodder; 06-12-2007 at 08:08 PM..
|
|
#24
06-13-2007, 12:37 PM
|
||||
|
||||
|
I've decided what to do with the body.. If the board still fits on the shortest setting, it will be the NSX body. If it doesn't, I'm gonna order a Yellow Skyline body and have blownxmod (or someone else if he can't) paint the Three Crowns design on the hood of it, and possibly touch up a few things.
Anyways, this is the last update for the summer, I might be on a little later, but I doubt it.  Quote:
 Quote:
  Quote:
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen"
|
|
#25
06-13-2007, 04:55 PM
|
||||
|
||||
|
Quote:
|
|
#27
08-06-2007, 07:57 PM
|
||||
|
||||
|
Is RedSXmodder still around?
For those that are wondering, here's my inspiration on this one...* http://www.xmodworld.com/modules.php...iwaver&start=0 Similar design, but a diffrent body, and a diffrent board. Gonna get the servo mounted later, then it's just to get the final quote and adress from XCRL and I can send of the EP... and the motor. And I emailed CXP about the Sway Bar, AM has bearings again... But I need another Micro-T board, and my CF Shaft and Bearings.. Almost done now. If I order the parts, it's in the home strecth! To-Do List: -- Order Stuff from AM -- Ship EP to -XCRL- -- Mount Servo -- Figure out servo horn -- Test Voltage on Batteries -- Extend Travel on Rear Arms (need to find my tut, can't remember how) -- Measure out distances for wires -- Find my extra Dean's -- Order my eXo-T from Ripper -- Get another Micro-T Board** * Yes, I actually used search, for once! ** Naturally I still want my Micro-T to run *** Pictures of the final mock-up later! Yes, I'm intrested in a whole (used, and WORKING) micro-t, or just the EP and Servo, if it's under $40, and you have a good rep!
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen"
|
|
#28
08-06-2007, 08:04 PM
|
||||
|
||||
|
Where do you guys get the clear Gen1 chassis anyway?
__________________
|
|
#29
08-06-2007, 08:08 PM
|
||||
|
||||
|
Quote:
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen"
|
|
#30
08-06-2007, 08:13 PM
|
||||
|
||||
|
Ah, so the CF top plates come with the clear chassis? Sweet! XI has 'em in stock!
I'll probably end up going for a Gen1 chassis build-up later on, anyway. Thanks.
__________________
|
|
#31
08-06-2007, 08:16 PM
|
||||
|
||||
|
Quote:
I would love to see that.. The chassis is nice, becuase you can use multicolored servo's and it shows off the EP... Oh, and no problem.
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen"
|
|
#32
08-06-2007, 08:19 PM
|
||||
|
||||
|
Quote:
Which TinyRC chassis are you talking about? I'm thinking of picking up the Zero-Products X-Frame Mod and Pro chassis sets and doing a hobby-grade electronic Gen1 build up
__________________
|
|
#33
08-06-2007, 08:27 PM
|
||||
|
||||
|
Quote:
I might do one next year, but I'm on a tight budget.. I barely have $1900 for a car (need it by oct.), I need to finish this, start and finish the EvoT, Put the micro-t together, and fix my Revo... But I have a 'secret' project, using more Micro-t boards (I like the small size), but more than two servo's, and a piggy back ESC... It will be intresting.. Kinda get's you 'high'....
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen"
|
|
#34
08-06-2007, 08:34 PM
|
||||
|
||||
|
Wow... Looks like you've got your hands tied up... For me... I don't even where I even get my money
 I don't even have a job... No one wants to hire an Ex- Computer Tech...I remember a pic of Viperdout's XMOD that had the X-Frame chassis... I'll see if I can dig it up in the gallery
__________________
|
|
#35
08-06-2007, 08:36 PM
|
||||
|
||||
|
Quote:
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen"
|
|
#36
08-06-2007, 08:41 PM
|
||||
|
||||
|
Quote:
__________________
|
|
#37
08-06-2007, 09:51 PM
|
||||
|
||||
|
Ha, sweed, no worries, I'm not gone....yet...
You back from sweden yet? I see your going full throttle with this one. Would you have an idea where I can get some Micro T guts? I've been searching for a remotely hobby grade ESC system small enough to fit without mods. What do you know as far as Iwaver Tx's compatibility with Mini-Z/Micro T/Xmods? I was just curious cause I'd really like to ditch the stock tx, its ****ty. I've been working on some stuff, also. Right now: Kingcrawler (ugh, this thing never ends) TRM-P1 Pan car adjustable shock system (gen1) Good to see you again! Later RedSXmodder
__________________
Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
|
|
#38
08-06-2007, 09:57 PM
|
||||
|
||||
|
Quote:
Quote:
 Quote:
I have a MR-02 board laying around, it just needs a new steering pot.. Or possibly upgrade to a real servo.. Quote:
 )
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen"
|
|
#39
08-07-2007, 09:19 AM
|
||||
|
||||
 Looks like I'm gonna be using the Yellow Skyline for a body... Don't like the look of the Black Skyline on it, and there's no other good yellow cars.. The NSX is too short and it won't fit the EP in (I think, Haven't checked yet), so that's out of the question, but it's always there in case I want to.. And it's nice to grab a mint Yellow Skyline Body while you can! Hm.. Looks like this project will top $200... Probably around $250... Then it another $60 to complete the EvoT Crawler... and after that it's time for me to get 'high' on RC.. Right RED? AtomicMod's Cart Contents: $65.92 -- Gen1 Wide Track Shielded Bearings Set -- $8.99 -- Atomic Aluminum Locking Nuts -- $3.99 -- Gen1 Shielded Bearings Set -- $14.99 -- Gen1 Perfect Shaft "Long" -- $12.99 -- Black Skyline mirror set..* -- $3.99 Total Parts So Far, Cost So Far: $124.92 -- Clear Chassis & Carbon Fibre Chassis Set -- $14.99 -- FreeStyleXmods Li-Ion -- $25.00 -- GPM Front Cup Set -- $14.99 -- GPM Front CVD's -- $9.99 -- GPM Rear Cup Set -- $14.99 -- GPM Rear Dogbones -- $4.99 -- GPM Front Knuckles -- $15.99 -- RadioShack Tire Set -- $7.99 -- Stage 2 Motor Upgrade -- $15.99 -- RadioShack AWD Upgrade -- *Price Unknown*^ -- Custom Supension Upgrade -- *Price Unkown*^^ In Progress Stuff: -- Micro-T Electronics Mounting** -- Micro-T Servo Mount*** Still To Come/Order: -- Atomic Chili Evolution Motor -- $34.99 -- Posi-Traction Rear Kit -- $3.99 -- GPM Motor Mount Kit -- $15.99 -- Woah Nelly or Spider Ext. Turbo -- *Don't Know Price* -- CXP Strut Bars Rear -- *Awaiting Price Quote* * Unless I find my mirrors from my black skyline.. ** Will be mounted verticly inside the chassis, if I have my way... *** Styrene works wonders. Uses Micro-T Servo Saver. ^ Anyone know the original price? ^^ Anyone know the original price?
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen" Last edited by Sweed; 08-07-2007 at 09:34 AM..
|
|
#40
08-07-2007, 05:16 PM
|
||||
|
||||
|
Mmmmmm, sweed, why are you getting the stage 2 motors? I could rewind you one 3x as good for the same price as the set...
Also, I'm curious as for how the EVOt is going. Looks like you've got a bit of work ahead of you. Good luck, I'll be rooting for you, lol... Later, RedSXmodder
__________________
Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
