#21
|
||||
|
||||
Quote:
goodfellaz from xmf did a dyno buster as well, in fact i'm pretty sure it was pocket change before i got it. plasmatomic, liths, 1/18 esc. unfortunately the only way to show true speed would be a radar detector or finding an accurate way of time a set distance at top speed. so until everyone can afford a radar gun or get access to one, the dyno is the standard test method. i do know i used to concentrate on making them as fast as i could, until i maxed the dyno, then its like where to go from there? cowboysir03, i'd be interested in working with you on coming up with a few projects to are insanely fast, but still drivable. hit me up on pm if you want.
__________________
Keep smiling, people will wonder what your up to. TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526 |
#22
|
||||
|
||||
Well I won't acknowledge an Xmod as "the fastest Xmod in the world" unless they actually check it with a radar gun of some sort. Its up to everyone else how they interpret it of course .
It of course would cost extra, but if your wanting to have a real record it clearly is going to cost some money. Edit: There is a hot wheels radar gun that is a REAL radar gun and relatively accurate. It can measure up to 100mph and will work on small r/c cars. This can be had for $25 dollars SHIPPED. Just as cheap as the speed checker. There is also some relatively good hacks for it. Check it out ----> http://www.edparadis.com/radar/ Last edited by Action B; 12-11-2009 at 07:53 PM.. |
#23
|
||||
|
||||
thats your choice, you can take "fastest" many ways, fastest top speed, fastest track time, etc. and i highly doubt one car would fall in both categories. but the standard for top speed is the speedchecker, and i don't know about anyone else, but i am not going to pay to have my cars checked with a radar gun. it's a 1/28th scale car, nothing that i think would need to go to that measure to say if your cars fast or not.
__________________
Keep smiling, people will wonder what your up to. TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526 Last edited by zippo855; 12-11-2009 at 08:01 PM.. |
#24
|
||||
|
||||
Quote:
If your willing to pay $25 for a speed checker then its the same amount for a cheap radar gun . We go far further for other aspects of the hobby. I could say the car is 1/28th scale, I'm not going to pay to make it go fast, or no reason to spend money to have a fast R/C car to say I won the recent Mini-Z regional championship. Your entitled to your opinion but I think it seems a little out of touch with the true nature of the question. Whats the fastest Xmod in the world? In my opinion it can not be definitively answered without at least a low end radar gun. |
#25
|
||||
|
||||
for 25 bucks id give it a shot, but the prices im seein are a lot more
http://www.amazon.com/Mattel-J2358-H.../dp/B000EHLB0M 89.99 cheapest im seeing period is 35 for a used one http://www.google.com/products?sourc...N&hl=en&tab=wf if it was the same price as a speed checker i can see this moving towards the standard for testing, but at the price i dont see it becoming a trend
__________________
Keep smiling, people will wonder what your up to. TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526 |
#26
|
||||
|
||||
Quote:
Last edited by Action B; 12-11-2009 at 08:07 PM.. |
#27
|
||||
|
||||
little difference in a 50 dollar xmod and a 200 1/16th scale rc.
__________________
Keep smiling, people will wonder what your up to. TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526 |
#28
|
||||
|
||||
Well to make it go like 50 mph they are about the same price right>?
Last edited by Action B; 12-11-2009 at 08:33 PM.. |
#29
|
||||
|
||||
e revo about 30 bucks to go 50 mph, series connector, and additional battery
my dyno buster performance parts to get it to hit 99, 33$ lipo handwound motor, cost of motor wire, i got it in a package deal so i dunno actual cost 1/18 micro t esc used 25 bucks so 50-60 bucks. 110 vs 230, still a sizeable difference in cost. xmod that fast, not stable on ground my brushless propulse isnt that stable at those speeds either erevo, seems to be rather controlable at those speeds. a lot wider and wider tires to radar gun a 1/16 e revo would be a lot easier than an xmod as well. my dyno buster was very hard to keep going in a straight line.
__________________
Keep smiling, people will wonder what your up to. TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526 |
#30
|
||||
|
||||
Quote:
If its not stable at the speed, then it cant really go that fast in my opinion. They are jusy dyno queens. Well, I guess it doesn't have to be stable, but at least do it once lol. Plus I think you and I both know that usually 50mph is not easily or usually obtainable on 50-60 bucks. Also count the price of the xmod starter kit itself. Furthermore, a E-revo is claimed to be able to do around 50mph out the box. Edit: Actually I see thats not the case. You were probably right on the price of erevo. Last edited by Action B; 12-11-2009 at 08:37 PM.. |
#31
|
||||
|
||||
Quote:
__________________
Keep smiling, people will wonder what your up to. TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526 |
#32
|
||||
|
||||
Quote:
|
#33
|
||||
|
||||
subawow maxed the dyno before it hit peak rpm, and i understand normal speeds like 71 on my mustang are not going to be the number get on the ground, the dyno reduces the aspect of enviroment and weight of the car. the only thing i was getting at is its the general basline because its the easiest obtainable result.
i'm going to be starting work on the buick again this weekend, so maybe that will be the chassis to test.
__________________
Keep smiling, people will wonder what your up to. TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526 |
#34
|
||||
|
||||
I bought the above mentioned radar gun, walmart had them on clearance a while back for 10 bucks. It sucks, the same car will give wildly different numbers depending on how you hold the gun and we never got one reading off of it that we trusted as being even close to accurate. We could never repeat even close to the same speed reading twice.
|
#35
|
||||
|
||||
Quote:
|
#36
|
||||
|
||||
Xmods are too tiny at speed. Not enough suspension travel, and they are fairly top heavy.
My old gen1 was capable of atleast 25mph (which is FAST for a car that small) and stable without a body on. That's on Micro-T Electronics, Stage 2 motor, Li-ion. Body on, it would roll (easily). Bigger (1/18th) RC's start running into problem around 65-80mph regarding staying on the ground. The just want to fly up. If you go back a year or two, RC Car Action did a "Worlds Fastest RC" thing. I believe Nic Case won with a car capable of 180mph(?) on the road. Making a fast xmod is easy. Making it stay on the road, without flipping and making sure it doesn't tear itself apart are the biggest issues. IIRC, CowboySiR's GTO shredded it's gears a few times.
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen" |
#37
|
||||
|
||||
Quote:
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶ |
#38
|
||||
|
||||
Anyone remember PH2T's 11v 3 lipo Evo?
__________________
You know what I'm gonna do? I'm gonna get myself a 1967 Cadillac Eldorado convertible, hot pink, with whale
skin hubcaps and all leather cow interior and big brown baby seal eyes for headlights. Yeah! And I'm gonna drive around in that baby at 115 miles an hour, getting 1 mile per gallon. I may be king of the idiots, but my kingdom is vast and my subjects are everywhere |
#39
|
||||
|
||||
Probably before my time, is it on here, Id like to see it... I had the 4 lith 14.8volt "Make your Guesses"
I think we have gotten a bit complicated as far as how the fastest Xmod should be timed. I guess we would all have different opinions, but the hobby standard is the speed checker. No sense to try and measure the speed of a little RC with 1:1 scale precision. I doesn't matter how it's checked, I feel we would still all have different opinions on which is the fastest...... There are alot out there.
__________________
XXX FREE modding Service: http://www.xmodsource.com/forum/showthread.php?t=17800 PM me for a quote or any questions. HAPPY MODDING 100% Positive Itrader feedback http://www.xmodsource.com/forum/itrader.php?u=6901 |
#40
|
||||
|
||||
Timing is easy, you can build a dirt simple light-trap timing system just like a drag strip.
PH2T is probably a few years before your time, the Aussie responsible for inventing the Nelly Turbos. Just out of free whim wired up 3 cell lipos (back when lipo and evo's 1st met) and it surprisingly survived on a stock board. Ran it for a long time with no problems form the excess voltage and it was hilariously fast. It's somewhere on XMW though, not here.
__________________
You know what I'm gonna do? I'm gonna get myself a 1967 Cadillac Eldorado convertible, hot pink, with whale
skin hubcaps and all leather cow interior and big brown baby seal eyes for headlights. Yeah! And I'm gonna drive around in that baby at 115 miles an hour, getting 1 mile per gallon. I may be king of the idiots, but my kingdom is vast and my subjects are everywhere |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|