|
|
|
#1
08-04-2008, 08:17 AM
|
||||
|
||||
Reverse Problem
In my F-150 I can go forward and reverse but when I go in reverse the gears grind. When I go forward this perfect. Can anyone help?
|
|
#2
08-04-2008, 10:59 AM
|
||||
|
||||
|
Sounds like the motor isn't seated right, you accelerate forwards and the motor moves into a position where it can turn the wheels but in reverse it comes loose and moves to a position where the gears don't quite mesh and all you get is a bit of grinding.
Take the motor out, check that the mounts are all correct and that you have a gear setup that will connect correctly, the put it back together and make sure everything is nice a tight.
__________________
Duct Tape is like the force:- it has a light side and a dark side and it binds the universe together.....
|
|
#3
08-04-2008, 11:57 AM
|
||||
|
||||
|
is it 4wd? if so make sure that you have the correct length shaft and that you have the front and rear bearings on....also, make sure you have those tiny bearings in place on the second gear (the gear on top of the differential), if you dont have the little bearings on those studs, it'll grind in some instances. also, make sure your dog bones aren't binding up for any reason.
|
|
#4
08-04-2008, 02:59 PM
|
||||
|
||||
|
plus. check that your pinion is pushed all the way in.
it could also be that you have the wrong spacer with the wrong pinion etc. check those aswell. later T.I.M
__________________
"Where There's Will, There's A Way" "Many Of Lifes Failures Are Those People Who Did Not Realize How Close They Were To Success When They Gave Up" 
|
|
#6
08-04-2008, 07:25 PM
|
||||
|
||||
|
I took out the 4X4 and put it back in. it still grinds. It grind without the 4X4.
Took out the motor and put it be in. Still grinds. Checked all Gears. Still Grinds
|
|
#8
08-04-2008, 07:40 PM
|
||||
|
||||
|
Not an option when the prices for them have jumped to high online..
__________________
You know what I'm gonna do? I'm gonna get myself a 1967 Cadillac Eldorado convertible, hot pink, with whale
skin hubcaps and all leather cow interior and big brown baby seal eyes for headlights. Yeah! And I'm gonna drive around in that baby at 115 miles an hour, getting 1 mile per gallon. I may be king of the idiots, but my kingdom is vast and my subjects are everywhere
|
|
#10
08-04-2008, 08:09 PM
|
||||
|
||||
|
Im not going to buy a new chassie.
Does anyone know any else about this?
|
|
#11
08-04-2008, 08:19 PM
|
||||
|
||||
|
i had this issue on my crawler chassis before i turned it into a crawler. i ended up having to buy the composite 3 unit gear for it and new bushings on it. and that took care of my problem.
__________________
Keep smiling, people will wonder what your up to.   TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526
|
|
#12
08-04-2008, 08:23 PM
|
||||
|
||||
|
how much is it and where can I find it?
|
|
#13
08-04-2008, 09:50 PM
|
||||
|
||||
|
Check the spur gear.i had that problem before and it was the spur gear.
__________________
 bad spammers  !!!Quote:
|
|
#14
08-04-2008, 10:17 PM
|
||||
|
||||
|
atomicmods is where i got mine, it wasn't very expensive.
__________________
Keep smiling, people will wonder what your up to. TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526
|
|
#16
08-04-2008, 10:30 PM
|
||||
|
||||
|
__________________
Keep smiling, people will wonder what your up to. TEAM X.I. my massive collection of xmods http://www.xmodsource.com/forum/showthread.php?t=13526
|
|
#17
08-05-2008, 07:50 AM
|
||||
|
||||
|
ok thanks
|
|
#19
08-05-2008, 09:23 AM
|
||||
|
||||
|
Yeah I did and it still grinds
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
