how do i achive this look?

[ubermod]

hey guys ive bought a new nissan titan and i want to give it a owrider look like here

http://images.truckinweb.com/brandpa...+left_side.jpg

but how do i achive this look?
ive been paintingcitadel minatures for a couple of years so im quite a pro with a brush.

however im less confident with spraying has anyone got any tips or general help

tia josh

are you trying to get that paintjob? or the body drop?

i doubt you'll be able to pull off the body drop, because the chassis wont fit up into the body high enough... even if it did, you realise you wouldnt be able to drive it but maby in a straight line if u were lucky.

as for the painting, its really good air brush skills, more than likely freehand, no masking or anything. so i hope your good with it!

[fieldfairy2]

As for the paint i have no idea. Bondo will know.

for the suspension drop. You need the truck suspension and custom drop upgrade and this tut
http://www.xmodsforum.co.uk/showthre...ring+the+truck
hope this helps

[bondo]

if you want the body that low then youll have to drop it on a car chassis.

the paint isnt really a problem if you know how to layer it.flames like that are pretty easy over black.
it's just layers of white and kandy blue.
if your better with a brush then you might want to brush in the white and use the kandy blue through an airbrush.
the only problem is your flames will have sharper edges.

if your looking for how to do the paint then let me know and i can give you a quick walkthrough.

[darkendblades]

Originally Posted by SPR

are you trying to get that paintjob? or the body drop?

i doubt you'll be able to pull off the body drop, because the chassis wont fit up into the body high enough... even if it did, you realise you wouldnt be able to drive it but maby in a straight line if u were lucky.

as for the painting, its really good air brush skills, more than likely freehand, no masking or anything. so i hope your good with it!

not true SPR i dropped a f-150, lol heres some pics and a vid.

whoo hoo! way to prove me wrong, let me remove my foot out of my mouth now thoug hahah...

but to redeem my self so i dont look totally wrong... your tires are not tucked the same as the titan truck he pictured :P sooo tech it doesnt count hahaha.

[darkendblades]

Originally Posted by SPR

whoo hoo! way to prove me wrong, let me remove my foot out of my mouth now thoug hahah...

but to redeem my self so i dont look totally wrong... your tires are not tucked the same as the titan truck he pictured :P sooo tech it doesnt count hahaha.

lol yeah i know but i can still drop it a little more if i want

[Nissanshift350]

Actually dark spr is right the titan body can't be dropped all the way like a f150 can. As bondo said I would use an extended car chassis

[darkendblades]

lol NS my f-150 is on a car chassis lol as soon as i get a titan boddy ill drop it too.

[noturday]

SPR, Darkendblades didnt prove you wrong, the F150 is a LOT easier to drop than the titan. in order to drop a tian like that with the stock body kit you would need the body kit just for the tonneu cover and the roll pan, and maybe the billet grilles for the front as well for more of a custom look. then the whole bed would have to be cut out, probably by dremmel, and the tonneu cover would most likely have to be glued on or something. then of course a major body drop would need to take place, and a chassis drop with car tires over the slammed rims wouldnt hurt either.

BTW guys, that truck has a dual personality

photo gallery:
http://www.truckinweb.com/brandpages.../photo_01.html

[Stampedekid]

Originally Posted by XMODS ARE ***!

awww so ***

Aww, why don't you just shut up and get lost! Anyways. I tried lowering my titan on a truck chassis, it didnt work too well. So now my titan is lifted, and my F150 is lowered. I like the looks of that titan. Josh, try fitting it to a car chassis or shaving part of the front clip off to lower the front, then shave down part of the rear mounting post or remove it to lower the rear. Also if you can get one, get a truck drop kit.

[fieldfairy2]

Also if you want it that low and if you will be using the slammed rims, strech car tires over the rims you will get a little more clearence under the fender. Dremeling the inside of the fender a little bit too will help.

[THE EDJ]

That's my slammed titan, nice stance and still fully functional. I just clip the body into the slot above the stock mount on the body and then shaved the rear body mount to the height I wanted in the rear. Also had to shave some stuff on the bottom side of the truck bed to get it to fit.

[Stampedekid]

Originally Posted by THE EDJ

That's my slammed titan, nice stance and still fully functional. I just clip the body into the slot above the stock mount on the body and then shaved the rear body mount to the height I wanted in the rear. Also had to shave some stuff on the bottom side of the truck bed to get it to fit.

Nice truck EDJ! I like the red on black rims, they really match the truck, and the red lugs are awesome! Have you tried shaving your front clip down, I did it on my G35, heres a pic.

[xmodscarbon's_lost]

Here is mine on a car chassis: (note it still needs work!)lowyouhowe.jpg

[Scionbeave]

i got my titan to sit really low with the drop kit and it was lower than yours EDJ and i didnt do anything to the body.

[noturday]

if i had a titan body kit i would have already tried this, and probably succeeded haha, but i'm not sure, because the titan body seems to be shorter than the f150 from the top of the bed down, which would make it really difficult to drop it that low.

[THE EDJ]

Originally Posted by Scionbeave

i got my titan to sit really low with the drop kit and it was lower than yours EDJ and i didnt do anything to the body.

well you still have that option with this truck too, since the chasis is pretty well stock

[darkendblades]

Originally Posted by THE EDJ

well you still have that option with this truck too, since the chasis is pretty well stock

haha i have a plan but it requires a new titan body lol or a used one and i bet i can get it to be lower then my f-150 lol so im going to look for one, and do this up lol.