#2
|
|||
|
|||
no.
some paints will work straight on the car whereas others won't. tape off the areas that you don't want painted and test it by spraying a bit on the car... if it sticks evenly over the whole car, go ahead and paint the stripes... if not, just sand the areas that you already taped around- that way, no other parts of the car will get scratched. also, be sure to clearcoat the entire thing when you're done, not just the sections you've painted
__________________
I drive a Salmon |
#3
|
||||
|
||||
ya but if u were to do a proper job you would sand it all down with like 300 grit then lay your stripes and clear coat the whole car so you dont have an edge from the orginal color and the stripe then wet sand it at 1500 (lightly or you'll go through the clear and in to the stripe). than clear coat tilll there is no edge any more and buff it with 1600-1700 wet grit and one more light clear coat.
Thats how its done properly!
__________________
-EVO 2005 Mustang locked rear diff stage 2 motor and springs 2300 mAh's power Body lowered over chassis -Custom 04 wide body mustang-Work In Progress http://excoboard.com/exco/index.php?boardid=15437 C-A-N-A-D-I-A-N-R-A-C-E-R |
#4
|
|||
|
|||
talk about bringing back an old post nubs
but if he sands down the whole thing, then he'll have to repaint the whole thing or else he'll have scratches on the whole car. if he's just doing stripes, make a light coat for the stripe and of course the rest will be taped off. clearcoat the whole thing when you're done as to get an even coat and equal glossiness around the whole car, not just the stripes
__________________
I drive a Salmon |
#5
|
||||
|
||||
thats why i said 300 GRIT AND LIGHTLY SAND! once the clear is aplyed it will fill the little 300 grit scraches!
__________________
-EVO 2005 Mustang locked rear diff stage 2 motor and springs 2300 mAh's power Body lowered over chassis -Custom 04 wide body mustang-Work In Progress http://excoboard.com/exco/index.php?boardid=15437 C-A-N-A-D-I-A-N-R-A-C-E-R |
#6
|
|||
|
|||
ahhhahaha 300grit man u guys are dumb u cause when u spray your clear coat on it u will se the scrathes what u wanna do it sand the clear off wit a sheet of 600 grit then go over it wit a 800 grit then wit a 1000 grit believe me i knwo i work in a body shop. it will turn out way better then a 300 grit sand job
|
#15
|
||||
|
||||
wow 7repeat posts thats like some kind of record
__________________
http://i12.photobucket.com/albums/a2...nXmas02sig.jpg |
#16
|
||||
|
||||
have you ever heard of deleting posts?????
or are you trying to rack up as many posts as you can to get out of the newbie catagory?????
__________________
http://www.freewebs.com/phoenixeclipse/my%20sig.JPG |
#17
|
||||
|
||||
mutiple dubble post to increase your post score thats seareuse
in that case...
__________________
http://i12.photobucket.com/albums/a2...nXmas02sig.jpg |
#18
|
||||
|
||||
i kid i kid I just whanted to get some use out of this pic (cool huh)
__________________
http://i12.photobucket.com/albums/a2...nXmas02sig.jpg |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|