![]() |
#1
|
||||
|
||||
![]() Difficulty 2/10
Takes about 2-5mins Ok, well i figured out a quick and easy way to lift a muscle car, to give it a more agressive look on the rear. Step #1: Items needed: Your xmods screw Driver A small Flat Head Screw Driver Your Xmod Body Xmod Rear Clip Xmod Chassi 2-56 Round Head Machine Screws & 2-56 Machine Steel Nuts ![]() Step #2 Take your Body & Unscrew the Rear Clip ![]() Next take out one of these three 2-56 Round Machine Head Screws ![]() (You can use any length, but i used the middle length one) Step #3 Take Whatever Screw Length You picked & put the Machine Steel Nut on it and screw it almost all the way down& if your worried about the nut coming unscrewed put a dap of model glue or hot glue on it, so it makes a temporary hold until you ready to remove it. ![]() Then Start Screwing it down, until you get the Right Height Your Looking For. (This is when you can test it to see if you like the Height or not) ![]() Here is How Mine Turned Out. ![]() Also One Reason Mine is So high is because i 6 celled it and i need to mount it on the roof of the car, so i can sit it lower. (Im out of Micro Dean Plugs) ![]() All Comments & Tips Apperciated
__________________
![]() ![]() TEAM XI
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|