![]() |
#1
|
||||
|
||||
![]() Difficulty around 4/10
Time 5-10 Mins per tire, 25-40 Mins for total Process Ok, well ive seen how other people have put oversized tires on the truck or hummer xmods. So i dug around in my room and found some huge tires, and wanted to attatch them to my mudder, so i figured out the easiest way i could think of to do it and it be reversible to. This is my first Tut so if there are any mistakes, let me know. Ok, Step #1 You will need the following items: An xmod truck chassi (with wide wheel upgrade, optional on that it just works better), Your Oversized tires, Some Model glue (plastic Cement) or Super glue (but model glue removes easier, A round File, Stock hummer, f-150, or Nissan Titan, Rims & Tires, Your tool to remove wheel nuts (the one shown in pick is the best to use), X-acto Knife (optional), And a soldering iron/gun, (not pictured) And yes im missing a tire. Note this will only work with rims and tires like the ones im using, This may also be similar to other tires but the steps may be a bit different. ![]() Step #2 Ok, first thing you do is after your soldering Iron/gun has heated up, put it in the hole on the rim and push it through, and move it around a little to make the hole bigger, so the round file can move around in it. ![]() ![]() Step #3 Then take your round file and start filing out the center hole, Use the X-acto Knife to cut off the plastic hanging off of the rim when your done filing. ![]() ![]() Then once you have done that, it should look like the pick below, After: ![]() Before: ![]() There should now be enough room to fit the Tool through the hole and have a little wiggle room. ![]() Step #4 Then take some Model Glue and/or Super Glue, and put it on the tread of the xmod tire. ![]() Then once you have done that put it on to of the tire and make sure you have it on straight, ![]() Then you push it in the center till it wont go down anymore. ![]() Repeat steps 2-4 for the other three Tires Here is the finished look, ![]() ![]() This is something similar: Ok, i did something similar to this Tut so here it is below, I cut and sanded out the center of the wheel then put a off road upgrade rim in the back of it and painted it Flat Black. ![]() ![]() ![]() ![]()
__________________
![]() ![]() TEAM XI
|
#2
|
||||
|
||||
![]() SSMT Wheels?
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen" |
![]() |
Currently Active Users Viewing This Thread: 4 (0 members and 4 guests) | |
|
|