XmodSource.com

XmodSource.com (http://www.xmodsource.com/forum/index.php)
-   New Members (http://www.xmodsource.com/forum/forumdisplay.php?f=56)
-   -   New member from Central Florida (http://www.xmodsource.com/forum/showthread.php?t=20338)

1FasImp 10-01-2011 03:46 AM

New member from Central Florida
 
Hello my fellow Xmodders. Im from florida and own 5 xmods. Im in the process of modding one now. I took some pics of four of my xmods. Ill list what I done to them and the problems they have. If anyone have any solutions, please do tell.

http://i166.photobucket.com/albums/u...s/101_0377.jpg



My Gen 1 Supra with custom paint job and some Radioshack upgrades. I left batteries in the packs and everyone of them leaked acid. I got to get it looked at.

http://i166.photobucket.com/albums/u...s/101_0363.jpg
http://i166.photobucket.com/albums/u...s/101_0364.jpg


Lancer Evo drifter, I cut out all vents, painted Blue, AWD, and some other Radioshack upgrades. It acts like the signal is cutting in and out. ( Im guessing the radio band is going out. not for sure.)
http://i166.photobucket.com/albums/u...s/101_0369.jpg
http://i166.photobucket.com/albums/u...s/101_0370.jpg


Scion Tc with the wide bodykit, AtomicMods aluminum Stiletto chassis, AtomicMods aluminum rear/front control arm, aluminum rear gear box (full gear box), AtomicMods Lithium Ion Pro S2 Pack, Radioshack stage 2 motor up grade. I fried the foward Fet after I installed the Lithiums. I got 2 sets of AtomicMods upgraded FETs on the way, and want to get 4 more FETs, the front aluminum gear box, and an AtomicMods motor. But I dont know which motor ( any suggestions). I want this to be my drag car.
http://i166.photobucket.com/albums/u...s/101_0372.jpg
http://i166.photobucket.com/albums/u...s/101_0373.jpg
http://i166.photobucket.com/albums/u...s/101_0374.jpg


Audi R8 AWD, bone stock (starter kit). I want to make this my track car ( more for cornering). What should i do to it?
http://i166.photobucket.com/albums/u...s/101_0366.jpg
http://i166.photobucket.com/albums/u...s/101_0368.jpg

My 5th xmod is another scion tc. I fried the foward FET on it to ( it was the first board I installed the Liths on.). I also managed to mess up the servo motor ( I think.), It stays turned to the right or left ( dont remember which way, its been a while since i messed with it).


Thanks for any help yall give me.

AntxmodMiniz12322 10-01-2011 04:01 PM

Get a atomic stock r motor or a custom wound motor from someone on the forums

1FasImp 10-01-2011 06:40 PM

Is that the Blue Evolution motor?



Update.... The FETs came in today. I wish i had the other 4, so I can put them on :(.

xmodsdewd 10-01-2011 08:31 PM

Tht scion is so nice, the lancer is cool to, needs a cleaun'up
but nice col. Dude.

1FasImp 10-01-2011 09:06 PM

Quote:

Originally Posted by xmodsdewd (Post 270681)
Tht scion is so nice, the lancer is cool to, needs a cleaun'up
but nice col. Dude.


Thanks, I want to give the TC a paint job. I havent decided on the color yet. Yea the Lance has hit quite a few things :p, but its part of the learning process. Lol.

1FasImp 10-02-2011 10:17 AM

Quote:

Originally Posted by xmodsdewd (Post 270696)
Where in central fl are you from?

Lakeland, Aurburndale.

What are some upgrades I need for a good drift car E.I. number of FETs stacked, and motor.

xmodsdewd 10-02-2011 11:24 AM

I use a evo with stock motor, bearings upgrade and custom drift tires.
here is a pic if my drifter

http://i1191.photobucket.com/albums/...928_194152.jpg

1FasImp 10-02-2011 03:51 PM

ok.

Nice stang.

xmodsdewd 10-02-2011 05:18 PM

These are my other stangs.
http://i1191.photobucket.com/albums/...928_194120.jpg
http://i1191.photobucket.com/albums/...928_194238.jpg
oh!! BTW, u should do a project thread if u paint the scion....u know, to give others ideas on how u paint and such, I know I love knew ideas.

runningreds1 10-02-2011 10:57 PM

get bearings if you dont yet they smooth everything out for drifting and if you want to change the motor use one with alot of torque or you could do what I did I made my own drift motor, I could get pics of my motor if you want.

xmodsdewd 10-03-2011 10:50 AM

Wat motor did u use?

runningreds1 10-03-2011 06:11 PM

i used a motor from a japanease model kit since it had alot of torque and i put in stronger magnets ,new armature ,brushes from a stage 1 and hacked up the can. I still need to test it though since im waiting for my gpm front knuckles.

xmodsdewd 10-03-2011 06:17 PM

Yea u better or it will end up like mine, when I did the board swap, the knuckle wet pop!

runningreds1 10-03-2011 06:20 PM

well the only reason im getting gpm was because i broke mine

xmodsdewd 10-03-2011 07:59 PM

I thought u were geting gpm cause you were afraid the stock ones would break lol.

runningreds1 10-03-2011 08:32 PM

been there done that lol.

xmodsdewd 10-04-2011 01:18 PM

Where do u get ur alluninum parts from,any special place?
I wads just wandering, cause I want to get some, but I don't know the best place

runningreds1 10-04-2011 05:35 PM

i got it from asiatees.com they have every gpm part still in stock but make sure your there when it comes because you have to sign for it. I missed it yesterday and have to wait forever now.:cry: :cry:

1FasImp 10-04-2011 07:28 PM

Quote:

Originally Posted by runningreds1 (Post 270709)
get bearings if you dont yet they smooth everything out for drifting and if you want to change the motor use one with alot of torque or you could do what I did I made my own drift motor, I could get pics of my motor if you want.

I got bearing for the TC but not the Evo. that would be cool.


Quote:

Originally Posted by runningreds1 (Post 270709)
i used a motor from a japanease model kit since it had alot of torque and i put in stronger magnets ,new armature ,brushes from a stage 1 and hacked up the can. I still need to test it though since im waiting for my gpm front knuckles.

I dont think i need all that. lol.

xmodsdewd 10-04-2011 08:50 PM

Basically all u need to drift is awd, and drift tires.


All times are GMT -4. The time now is 12:32 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.