my savys new make over (New engine New look)
 

MODS: if the pics are to big please let me know thanks.

i sent my lrp to robin on friday so in the mean time im putting the savy through the paces.
i still have quit a bit to do but heres what i got so far with a mock up of the motor, (used my old 21bb with my lrp nova head)
some of the goodies.
irc lst shocks
new adjustable uppers
an nice polish job on ALL the alumium even servo saver!
new cen diffs
new brake setup
rear tie rod eliminators (on there way)
more to come, i got a stainless screw kit on its way, so all the black plastic will get stainless and all the tvps will be held on with stainless.
i havnt decided if im keeping the stock blue lrp head on or using the nova, ill most likly keep blue untill summer. the head will be complimented with the blue stoppers on the servo are and also the blue atena tube.
i havent decided on black or blue couplers, ill prob just get both.
its been through 2 major make overs

started as:

[IMG=]http://i550.photobucket.com/albums/i...e/IMG_0045.jpg[/IMG]

second make over:

[IMG=]http://i550.photobucket.com/albums/i...e/DSC00088.jpg[/IMG]

and the third as it stands now:

[img=]http://i550.photobucket.com/albums/i...e/DSC00282.jpg[/img]

[img=]http://i550.photobucket.com/albums/i...e/DSC00274.jpg[/img]

[img=]http://i550.photobucket.com/albums/i...e/DSC00271.jpg[/img]

[img=]http://i550.photobucket.com/albums/i...e/DSC00262.jpg[/img]

[img=]http://i550.photobucket.com/albums/i...e/DSC00247.jpg[/img]

[img=]http://i550.photobucket.com/albums/i...e/DSC00265.jpg[/img]

[img=]http://i550.photobucket.com/albums/i...e/DSC00266.jpg[/img]

[img=]http://i550.photobucket.com/albums/i...e/DSC00269.jpg[/img]

oooo thats shinny :)
nice work on the make over the "second look" pic that head is battered man lol
what pipe are you running it looks like a boat tuned pipe :)

second pic haha, heads not that bad, its just wraped in tin foil since it was so cold outside. and good eye it is a boat tuned pipe, its a macs marine pipe, sounds amazing and gives a huge power inprovment

ahh sweet
as you are running a .21 you should get a huge take-off with that pipe mmm mite have have a look for one for my 21. powerd rs4 drifter :bigwink:

nah it was a axial 28 power when i put that pipe on. i now have a lrp 28 that was sent out to get even more POWER! cant wait haha. the 21 in the pics was just a mock up and to get a feel.

have a looksy
http://s550.photobucket.com/albums/i...t=MOV00072.flv

is that only a single speed?

The images are too large and break the forum table. The [img] tags have been broken leaving links. Once resized you may remove the = from the tags to reveal the images again.

Cheers,
Kyle.

its a 3 speed, and yes it is shifting into every gear, and its fine donzi every forum ive put them on hasnt had a problem.

well heres a update for u guys.
quick movie of my tower pro servo. this is for the ones that think they suck, well it turns the mulchers at a dead stop on carpet with no problem.
http://s550.photobucket.com/albums/i...t=MOV00593.flv

http://i550.photobucket.com/albums/i...DSC00550-1.jpg

http://i550.photobucket.com/albums/i...DSC00535-1.jpg

http://i550.photobucket.com/albums/i...e/DSC00533.jpg

http://i550.photobucket.com/albums/i...e/DSC00534.jpg

ooo is that beadlock?
i spy a wheelie bar through all of the shinyness
nice work man.

yup maximizer beadlocks with mulcher tires. and yup wheelie bar and all the purple was striped and i polished all the alum. came out good.
my new motor will be here soon. i bought a lrp last month and sent it to get modded so it should be insane.

dont forget to clearcoat that alloy ;)
love the beadlocks how soft are the mulchers ?(compared to dirtbones)

there not soft at all they come with stiff foams, they don't seem like they will balloon much which is good. As for clear coat nah I'll just polish um up every once in a while only takes about 2 mims with the polish I use. ( best u can get) just can't remember the name, it's a green liquid.

well i here if you want to stop the ballooning in tires, the thing to do is get the ribbed packing tape with the ribs in it like urg im a little tired right now so its a little hard for me to explain, but apperently if you wrap the foams in this packing tape they bearly balloon atall, so i here

yup heard that to but with the foams the mulchers come with they shouldnt expand much at all.