XmodSource.com

XmodSource.com (http://www.xmodsource.com/forum/index.php)
-   Xmod FAQ's (http://www.xmodsource.com/forum/forumdisplay.php?f=62)
-   -   THE angle turning left more than right ?? (http://www.xmodsource.com/forum/showthread.php?t=19735)

RCrally 10-15-2010 01:26 AM

THE angle turning left more than right ??
 
The turning radius for turning right is bigger than left. I found out due to the different between the angle of left and right steering. That means the angle turning left more than right.
The servo and wheel are right at the middle so the st.trim doesn't need to trim from controller. The servo move to the left side more than right from my observe. How to fix it? :-?

Tischo 10-15-2010 05:14 AM

hi, is your chassis an evo or a gen-1. If evo try to to remove the steering cover plate on the on the underside, itīs often that this item is screwed on to hard

winner 10-15-2010 09:11 AM

it is a very common problem on xmods and im sure there are plenty of other threads about it if you had taken time to search it. you need to recenter your servo gears. i'm almost positive theres a tut on how to do it in the tut section

RCrally 10-15-2010 05:27 PM

thx guys. My 2/3 xmods evo cars have this problem. I removed the steering cover plate but doesn't help. I believe it does not relate to cover plate. And it doesn't need to recenter your servo gears because it is at center already.

You can see the different btw left n right from the pic.


http://oi53.tinypic.com/ayn4ea.jpg

http://oi54.tinypic.com/15daqhg.jpg

winner 10-15-2010 10:41 PM

when thoose pics were taken did you adjust the steering trim?

RCrally 10-16-2010 04:56 PM

no, but servo was centered. I don't need to adjust the trim.

r3ap3r03 10-30-2010 12:31 PM

my friends car has the same problem... the servo is not turning as far right as it is left.
im gonna take his car apart and see if i can fix it... ill let you kno how that goes in a day or two.


All times are GMT -4. The time now is 12:28 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.