Grinding gear sound

[xmodificationer]

ok i started driving my titan and if i give it throttle it makes this grinding noise and the wheels dont turn. the dogbones are in place, when u hold it up and give throttle the wheels will spin, and it the noise wont be as loud, but once u put it back on the ground and do it, it makes that grinding noise. does anyone know how to fix this?

[mustanglover]

you striped the gears i think.
buy a new one or LOCK IT!

[xmodificationer]

what gears?

[mustanglover]

the diff. duh corey.

[xmodificationer]

i cant get it out i need a god screwdriver

[noturday]

its prolly doin that bacause u dont have the right motor spacer in for the gear on ur motor i had the same prob with my f150 a while back but i got the right spacer in and it was fine after that

[xmodificationer]

i have the right spacer in but it still do it

[noturday]

make sure ur motor is tightened down all the way then

[xmodificationer]

its is

[Life]

hmm what upgrades does it have it could be that there is hair and dust on the dogbones, A bearing missing on the diff, or low batts

[noturday]

well then maybe you did strip ur gears. lock the diff and see if it helps

[xmodificationer]

timetoshine said he was shipping one to me today so idk if thats the case and if not what else could it be?

[xmodsnut]

if you do have to replace the diffs just buy two FWD upgrades and put them in in place of the ones already in it. they are exactly the same on both the front and back.

[xmodificationer]

i have it in 2wd it has S2, bk, liftkit,

[chase4494]

mine is 4x4 and has the same problim and when i took tht 4x4 out if worked for like 5min and now its doing it angon in 2wd wtf is wrong with it ??

[xmodificationer]

idk btw im at school again in Mr.butts class lol

[Tightan]

Here, my titan was doing that a while back.. problem was solved when the back off my ear ring (actually flesh tunnel..) fell out and on the floor i found a bushing, the smaller one. So, i popped it in and hey presto it stopped grinding! Hope you find out your problem,

TIGHTAN:rr:

[xmodificationer]

k thanks

[Stampedekid]

it could be the liftkit. i had to remove mine because it did this, i removed it earlier and now it makes no noises at alll! :) :)

[xmodificationer]

that may be it because i put on the lift kit and then after that it started doing that

[hawkskater]

Mine just started making the same sound today after i took off the 4wd. Mine only does it when it is on the ground and the body is on it. Any ideas why? I have a stock motor and i know it has the right spacers and the gear isnt stripped.

[xmodificationer]

well i solved the problem either lock your diff. or in my case the problem was that the nubs at each end of the dogbones got worn dont so the diff. cant turn it

[luisp813]

well i had the same problem and all i did was tighten up the thing that holds the motor in place and it worked

[xmodificationer]

well i had the same problem and all i did was tighten up the thing that holds the motor in place and it worked

well in my case that wasnt it