PDA

View Full Version : Steering Help QUICK!


WRX Ryder
05-03-2007, 03:37 AM
well watch the video(my house is messy)if you dont see what happens,right when i plug my liths in to my EP,the wheels go either all the way to the right or all the way to the left.thing is i cant even move it anymore. plz help me

http://i9.photobucket.com/albums/a87/1337_xmod/th_HPIM0443.jpg (http://s9.photobucket.com/albums/a87/1337_xmod/?action=view&current=HPIM0443.flv)<-----CLICK HERE

FreakinMexiRican
05-03-2007, 06:21 PM
few things it could be.

1. you have to reset your servo.
2. you burned out your servo.
3. you have faulty connections from the servo to the board(happens lately).

remedy:

1. reset your servo. http://www.xmodsource.com/forum/showthread.php?t=8147&highlight=servo
2. you need a new servo.
3. check the board to see if the wires are all soldered properly.

that's bout all i can say.

gtislide
05-03-2007, 06:43 PM
Also look at the black and white wire on the back of the servo. They could be loose. Can you turn the wheels with the car on. If you can it is one of the black or white wires. They give the servo power. The 3 wires B,W,O are the signal for the servo.

xmodificationer
05-03-2007, 09:12 PM
clean out the servo gears i had a similar problem

WRX Ryder
05-03-2007, 11:36 PM
ok well i have a evo and that forum topic dont help me much.and i just got my wires resoldered by mike from undergroundxmods.soooo how should i clean the gears?

ok well i have a evo and that forum topic dont help me much.and i just got my wires resoldered by mike from undergroundxmods.soooo how should i clean the gears?

EDIT
Okay my wires for my servo: Black (top) and White (bottom). Is this the right order?

gtislide
05-04-2007, 07:51 AM
White top black bottom.

vzereeys
05-04-2007, 11:08 AM
It could also be your potentiometer. You can get a replacement at radioshack's parts bin.

chase4494
05-04-2007, 02:25 PM
could be your seurvo motor going bad thtsa wht mine did i replaced my motorer and it was good after tht.

WRX Ryder
05-04-2007, 02:33 PM
it was the wire order.i had to reolder them.thanks anywayz