PDA

View Full Version : AA 6 cell


modman54935
02-14-2007, 10:43 PM
i was looking around my room and i found these rechargable batteries thats are 700mah and 7.2 volts

they are double a's and they are a pack a six would they work on stock electronics?

SUPERSHELBY
02-14-2007, 10:45 PM
i don't think so...... try goin 4 lithium from www.atomicmods.com

BTW is it a EVO or GEN 1?

BART
02-14-2007, 10:52 PM
i was looking around my room and i found these rechargable batteries thats are 700mah and 7.2 volts

they are double a's and they are a pack a six would they work on stock electronics?
They would work fine if you could get them to fit. aa and aaa have the same exact voltage output. the only difference other than size is their mah rating (capacity) aaa are limited to about 1000 mah and aa are up to at least 2500 mah. more mah = longer run time but with aa you have the expense of extra weight. (700 mah aa's are probably nicd and not worth your time due to memory issues)

modman54935
02-14-2007, 11:04 PM
oh ok but wouldnt it be tourqey cause the 6 cell with the AA

BART
02-14-2007, 11:09 PM
they are probably nicd's that are wasted from laying around and any torque you would gain would be lost with the weight differential. Buy 8 aaa 1000mah from walmart and use 6 of them. They are nimh and will perform much better.

modman54935
02-14-2007, 11:15 PM
oh ok thanks guys

SUPERSHELBY
02-14-2007, 11:17 PM
or u could buy some energizer AAA lithiums

BTW these aren't rechargable but worth the investment

BART
02-14-2007, 11:26 PM
or u could buy some energizer AAA lithiums

BTW these aren't rechargable but worth the investment

However...6 of those would = 9 volts = bad:bigwink:

SUPERSHELBY
02-14-2007, 11:29 PM
not if he uses 4 of them:bigwink: like the stock setup

BART
02-14-2007, 11:51 PM
not if he uses 4 of them:bigwink: like the stock setup
correct...but he posted about 6 cells:bigwink:

SUPERSHELBY
02-15-2007, 12:11 AM
well just put it together and see what happens

#1_05mustang
02-15-2007, 01:24 AM
yea what SUPERSHELBY said just give it a try and see what happens and if you like it keep it that way

Sweed
02-15-2007, 01:37 PM
they are probably nicd's that are wasted from laying around and any torque you would gain would be lost with the weight differential. Buy 8 aaa 1000mah from walmart and use 6 of them. They are nimh and will perform much better.

More mah isn't always better. THere is info on this on AtomicMods' website in the FAQ.....

This is becuase a higher mah (~1000mah) may have a lower "C" rating. This will cuase them to hear up, and not last as long...

The "C" rating is the number of times the mah the cell can provide.

A 2C 800mah battery can continueously supply 1600mah for 30 minutes.
A 2C 800mah battery can continueously supply 800mah for 60 minutes.

A 2C 1000mah battery can continueously supply 1000mah for 60 minutes.
A 2C 1000mah battery can continueously supply 2000mah for 30 minutes.

And so on...... I'll post another thread (need permission first) about the "C" rating, but infro can also be found in the link below:

http://www.xmodsource.com/forum/showthread.php?t=7021

BART
02-15-2007, 02:31 PM
nice find but if i'm not mistaken they are talking about li-ion and poly cells, not nicd and nimh. The way i understand it is that 1000 mah means a draw of 1000 ma can be obtained for 1 hour (where ma is milliamp). so the bigger the mah the longer the run time. If i'm wrong then i'm wrong but this is how i think it works.

modman54935
02-15-2007, 06:08 PM
nice find but if i'm not mistaken they are talking about li-ion and poly cells, not nicd and nimh. The way i understand it is that 1000 mah means a draw of 1000 ma can be obtained for 1 hour (where ma is milliamp). so the bigger the mah the longer the run time. If i'm wrong then i'm wrong but this is how i think it works.

yeah u sound right i here'd that to