PDA

View Full Version : car trouble


skyline19
11-16-2004, 08:29 PM
my car runs really slow and iv even changed my batterys and
every thing

cols102
11-16-2004, 09:04 PM
The same thing used to happen to me when i was stillin running all that old school stock stuff and i never found out what was wrong with it... so i just got liths... They are soooooo worth it

hkstuned
11-16-2004, 09:22 PM
hey if you want me to take a look at it i can you just have to send me it thats why i posted up a thread so you could get help. i run an xmods install services but i also work on them so if you would like i can take a look at it for you.

viperdout
11-16-2004, 10:14 PM
What mods do you have?

hkstuned
11-16-2004, 10:26 PM
viper i think he is still stock

SwedishRacer
11-17-2004, 07:11 AM
ypur yellow bearings have worn out. you can fix this bye geting metal, clean your car out, make sure alll bearings are there and put it together

XspuXtXnikX
11-17-2004, 11:06 AM
I am not sure what you mean by slow but have you checked the controller remember there is a little switch at the top of the controller that changes the gear from hi to low. You might want to check that to see if that is the problem. Also if you just cant figure it out and want someone to check it out for you I would be glad to help

StiXxX
11-17-2004, 11:53 AM
if ur car barely moves and is reving the to full throttle

u hav broken a cup joint
if ur cars stock and i'm roght bout the joint
my guess would be the rear left one(the short one)

you'll find one in here http://atomicmods.com/parts.htm

XspuXtXnikX
11-17-2004, 01:30 PM
yeah I had one of those break on me a few weeks ago they are bad about doing that. If I was you if you need to get one of those is to go ahead and get the aluminum ones so you dont have to bother with them breaking

StiXxX
11-17-2004, 01:40 PM
yea i do need a set of aluminum ones :nod:

viperdout
11-17-2004, 03:30 PM
if ur car barely moves and is reving the to full throttle

u hav broken a cup joint
if ur cars stock and i'm roght bout the joint
my guess would be the rear left one(the short one)

you'll find one in here http://atomicmods.com/parts.htm

FOR THE LAST TIME, ATOMIC MODS IS THE STUPIDEST PLACE TO GO! YOU CAN ORDER THOSE 4 DOLLAR CUPS FROM RADIO SHACK FOR 89 CENTS! JEEZ!

XspuXtXnikX
11-17-2004, 03:40 PM
i with you and all for saving money so hey let me know whats wrong with your car and if it is the cup joint I'll give you one or sell you a complete rearend for 10.00 Hey you guys know of a cheap place to get the aluminum cups?

StiXxX
11-17-2004, 04:11 PM
if ur car barely moves and is reving the to full throttle

u hav broken a cup joint
if ur cars stock and i'm roght bout the joint
my guess would be the rear left one(the short one)

you'll find one in here http://atomicmods.com/parts.htm

FOR THE LAST TIME, ATOMIC MODS IS THE STUPIDEST PLACE TO GO! YOU CAN ORDER THOSE 4 DOLLAR CUPS FROM RADIO SHACK FOR 89 CENTS! JEEZ!
BLAH!
I JUST POSTED IT FOR THE FRIGGIN PIC OK
GEEZ
ALL I WANTED TO DO WAS HELP BY POSTIN THE LINK SO HE COULD SEE THE PART I WAS TALKIN BOUT INCASE HE WAS CONFUSED
I NEVER SAID ANYTHING BOUT BUYING THE FRIGGIN PART FROM THERE SO BACK OFF :x :evil: :letitout:

hkstuned
11-17-2004, 04:24 PM
hey cmon you guys lets all just not argue anyhow skyline19 if it your cup joints then i have some extras ill install for you for 4 dollers

viperdout
11-17-2004, 06:12 PM
if ur car barely moves and is reving the to full throttle

u hav broken a cup joint
if ur cars stock and i'm roght bout the joint
my guess would be the rear left one(the short one)

you'll find one in here http://atomicmods.com/parts.htm

FOR THE LAST TIME, ATOMIC MODS IS THE STUPIDEST PLACE TO GO! YOU CAN ORDER THOSE 4 DOLLAR CUPS FROM RADIO SHACK FOR 89 CENTS! JEEZ!
BLAH!
I JUST POSTED IT FOR THE FRIGGIN PIC OK
GEEZ
ALL I WANTED TO DO WAS HELP BY POSTIN THE LINK SO HE COULD SEE THE PART I WAS TALKIN BOUT INCASE HE WAS CONFUSED
I NEVER SAID ANYTHING BOUT BUYING THE FRIGGIN PART FROM THERE SO BACK OFF :x :evil: :letitout:

Then post the pic itself.

skyline19
11-17-2004, 09:14 PM
no its rele rele slow

skyline19
11-17-2004, 09:18 PM
it was my motor i switch them and it works fine

XspuXtXnikX
11-17-2004, 10:16 PM
although you are right abut the cup joints being 89 cents dont you have to pay for shipping? just curious

XspuXtXnikX
11-17-2004, 10:18 PM
hey also that motor your talkin bout do you want it ? If not I could always use a spare motor to play with.

StiXxX
11-18-2004, 12:31 PM
Then post the pic itself.

i didn't want to save a pic and put it in my photobucket file of just the joint
plus i was bein lazy :lol: :lol: :lol:

hkstuned
11-18-2004, 12:39 PM
lol stixxx anyhow i was wanderin about the alluminum cup joint you have how much you want for them i could use some new allu inum ones

StiXxX
11-18-2004, 01:47 PM
BRRR :-?
I don't hav those
ur confused :lol: :lol: :lol:

hkstuned
11-18-2004, 01:52 PM
hey stixxx whats your yahoo dude
mine is hkstuned

StiXxX
11-18-2004, 01:53 PM
hey stixxx whats your yahoo dude
mine is hkstuned
u hav it already ur on my list

skyline19
11-20-2004, 06:41 PM
yeah i want my that motor ill play around with it

BlackSky909
11-25-2004, 10:42 AM
I have alot of stock motor's for sale on my site