setting up with li-ion

[5.0saleen]

to run with Li-ion Batteries, what else do you need to do to make it work with out over heating or frieing the board?

[SwedishRacer]

nothing, nothing that I know of.

[paco14]

u might want to get FETs but u dont need then to run li-ions...

[SwedishRacer]

there will be no difrence with FETs, FETS you need for certain motors, not radio shack motors...

[viperdout]

there will be no difrence with FETs, FETS you need for certain motors, not radio shack motors...

Yep. No worries with li-ions, just make sure you don't run them down to under 3 volts, or you damage them.

[BlackSky909]

When i am installing the quick kit lion batteries for AtoMic mods... i know i need to cut the two stock battery holders off thne there will be some red and black wire from the stock battery wires. then i hook up thye qyuick kit to the stock black and red wires then it should work? please somebody reply

[viperdout]

When i am installing the quick kit lion batteries for AtoMic mods... i know i need to cut the two stock battery holders off thne there will be some red and black wire from the stock battery wires. then i hook up thye qyuick kit to the stock black and red wires then it should work? please somebody reply

I'm not familiar with Rob's kit, but I believe that it has wires included. Also, why would you need to cut off the stock holders? They're just screwed on, and slide off.

[cols102]

Yeah you need to solder it and then heat shrink it for extra durability but u can prob just heat sink it if your lazy or dont know how to solder.

[SwedishRacer]

which quick kit, the one with holders? If so cut it off and then follow the TUT (www.http://www.atomicmods.com/How_To/XMOD_Pro_Kit/XMOD_Pro_Kit_Install.htm)

[BlackSky909]

Can some1 give me a good quality lithium kit at a good price and a good quality

[viperdout]

Can some1 give me a good quality lithium kit at a good price and a good quality

All of them are the same. If you can't solder, you cannot install a lithium kit.

[XspuXtXnikX]

If your really that worried about doing the soildering either read a few tutorials or find someone that knows how to soilder and print out the tutorial for them. You can always find someone to soilder.

[SwedishRacer]

if you still go to sckool as a friend!

[hkstuned]

yea like me i install them for people and i also do FET'S my price list is in my sig ill give my address only if you r willing to have me install

[BlackSky909]

Yea i can do all that stuff like lith's but not really experienced with FET's

[Fielder456]

Yo, call me a noob cauz i am with the whole xmod concept, now wat the hell is soldering :blush: