musclecars4life
12-04-2006, 03:11 PM
How to mount GEN1 Bodies on an EVO chassis:
tools:
screwdriver
gen1 body
EVO chassis
http://img77.imageshack.us/img77/2890/toolsuc1.jpg
Step 1:
clear all wires out of the way so you can get access to the motor mount screws
http://img57.imageshack.us/img57/9779/step1pic1rd6.jpg
http://img77.imageshack.us/img77/6888/step1pic2ji2.jpg
Step 2:
unscrew all screws connecting the motor mount to the rest of the chassis
http://img58.imageshack.us/img58/3667/step2pic1tm1.jpg
then turn it over and remove the bottom screws that connect it to the rest of the chassis
http://img58.imageshack.us/img58/6232/step2pic2sx6.jpg
http://img174.imageshack.us/img174/101/step2pic3yb5.jpg
Step 3:
remove the gray spacer
http://img174.imageshack.us/img174/303/step3pic1mn3.jpg
move motor mount foreward and replace all screws
http://img123.imageshack.us/img123/5599/step3pic2av8.jpg
Step 4:
put clear clip on gen 1 body (i didn't have on eso i used the firebird one
http://img231.imageshack.us/img231/6026/step4pic1xc7.jpg
http://img161.imageshack.us/img161/52/step4pic2pv8.jpg
Step 5:
take the EVO chassis and the gen 1 body and put the clips where they are suppossed to go.
http://img47.imageshack.us/img47/2166/step5pic1wy7.jpg
then you are done... ENJOY
http://img161.imageshack.us/img161/5669/step5pic2zp5.jpg
sorry about the blurry pics i'll take some better ones later. ENJOY
thanks,
MC4L
tools:
screwdriver
gen1 body
EVO chassis
http://img77.imageshack.us/img77/2890/toolsuc1.jpg
Step 1:
clear all wires out of the way so you can get access to the motor mount screws
http://img57.imageshack.us/img57/9779/step1pic1rd6.jpg
http://img77.imageshack.us/img77/6888/step1pic2ji2.jpg
Step 2:
unscrew all screws connecting the motor mount to the rest of the chassis
http://img58.imageshack.us/img58/3667/step2pic1tm1.jpg
then turn it over and remove the bottom screws that connect it to the rest of the chassis
http://img58.imageshack.us/img58/6232/step2pic2sx6.jpg
http://img174.imageshack.us/img174/101/step2pic3yb5.jpg
Step 3:
remove the gray spacer
http://img174.imageshack.us/img174/303/step3pic1mn3.jpg
move motor mount foreward and replace all screws
http://img123.imageshack.us/img123/5599/step3pic2av8.jpg
Step 4:
put clear clip on gen 1 body (i didn't have on eso i used the firebird one
http://img231.imageshack.us/img231/6026/step4pic1xc7.jpg
http://img161.imageshack.us/img161/52/step4pic2pv8.jpg
Step 5:
take the EVO chassis and the gen 1 body and put the clips where they are suppossed to go.
http://img47.imageshack.us/img47/2166/step5pic1wy7.jpg
then you are done... ENJOY
http://img161.imageshack.us/img161/5669/step5pic2zp5.jpg
sorry about the blurry pics i'll take some better ones later. ENJOY
thanks,
MC4L