PDA

View Full Version : Body Kits


Anonymous
02-23-2004, 12:33 PM
Can you buy different body kits for you xmod other than the ones they sell at the shack?
If so, what sight, or how do you make them.
:o

bullerschling
02-23-2004, 07:39 PM
you can get models at a regular hobby shop that are in 1:25 scale. those will work if you can find a way to mount them on the frame. Otherwise, I dunno

Kyle Chandler
02-23-2004, 08:10 PM
Zmods whole differnt body though and it would probley cost less.... but idunno >.<

Anonymous
02-27-2004, 05:47 PM
all you have to do is go to a hobby store and buy the mini z bodies :bigwink:

skyliner86
03-12-2004, 10:45 AM
what the hell is a z mod?

SupraSpeeder
04-14-2004, 01:18 AM
Hey, 1:25 scale models wont work i tried it and wasted $20. After doing some research i found out that Xmods are 1:28 scale models not 1:25. only 1:28 scale models will work

Nismo_34
05-09-2004, 08:55 PM
wat body it do u like best my fav. is the mild body kit :rr:

aznballa2k4
05-10-2004, 04:18 PM
well i'm creating my own bodykit out of the aftermarket ones sold at radio shack. i'll try to get more work done on it and try to get new progress pics up to show you.

Nismo_34
05-11-2004, 07:08 PM
ok das coo i would if i knew wat i would do

Kon Artist
07-03-2004, 02:16 AM
Can you buy different body kits for you xmod other than the ones they sell at the shack?
If so, what sight, or how do you make them.
:o

You need multiple Supplies.

CivicFool
07-03-2004, 07:45 PM
Can you buy different body kits for you xmod other than the ones they sell at the shack?
If so, what sight, or how do you make them.
:o

You need multiple Supplies.

^^^yup. If you do take it from another model and its too big what you will need to do is. Cut the body kit in half. Then sand it down on the sides where you cut evenly on both halfs of the kit. occasionally put the 2 pieces together to see how much more you need to sand off. Once you got it the size you want. Glue the 2 pieces togther with super glue and then get either Bondo Body Filler or Tamiya Epoxy Putty and fill in the middle crack and sand it until you can see the crack anymore. You make also need to to do some extra cuttin where the grill and helights are but an easier way is to cut the top off of the model kit and xmod kit and just switch them. Then do the same procedure that you did to make the kit smaller with the super glue and the bondo or putty.