mycrors4
08-09-2010, 12:38 AM
Well, long, long ago, in a galaxy far, far away, lived a project called "Project Ehh" (not a Canadian reference)
as time past, a competiton on urc emerged, and now, presenting
Project Ehh V2.187564938475623820383465474
and to be more clear
it's a 2wd $300 limit(electronics dont count) all terrain project, must be finished by august 31st
im planning on making a micro t scale puller, and i can pull my xmods around
i already had a project on it, made it into a hummer, but my f150 has the holes made for a trailer, so im gonna redo everything and put the f150 body on it.. then if i have time, make a trailer.. im just planning out a couple more things(other projects) and then ill start
this is the project as it sits now.. unfinished
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler001.jpg
this will be the new body
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler002.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler003.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler004.jpg
as you see.. it's an xmods f-150 body... its been beat up... beat up real bad...
and i added a towing hitch
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler005.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler006.jpg
some scratches
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler007.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler008.jpg
the rear "roll cage" will go there
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler009.jpg
as u see.. i had lights
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler010.jpg
aaaaaand.. now it's gone.. along with the rear mounts
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler012.jpg
this is how i had mounted the hummer(bad idea from the start.. lol)
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler011.jpg
with the mount off.. this is how it was lengthened
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler013.jpg
the wheelbase difference
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler014.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler015.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler016.jpg
and the rear tower hits the bed, but with the roll cage in place, it should protect it once i make a hole for it to go through(or maybe it might not even go through... maybe a different mounting method will be used
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler017.jpg
that's about it for now... more to come
costs so far
Micro-T RTR - $80
Bearings - $10
3 Racing alloy tranny case with bearings for the spur gear shaft $16
X-Truck Shock Set(the micro-t is using x-truck shocks) $15
F-150 body w/ body kit - $15
Tow Hitch Mod - $1 or use of spares(i used spares that were laying around)
total cost so far: $137
well.. i thought... hell.. i have a full 3 weeks.. why not just play around with it a bit
turned it back into a regular T to drive around
and the reason i say 3 weeks is cause im going to palm springs after this week.. and im staying there for a week.. cutting it 1 week short for me, but ill manage
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler018.jpg
and just for a comparison.. thats how long the body is compared to a stock t
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler019.jpg
:D
update:
got in the DT wheels
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler020.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler021.jpg
i h8 e-clips, i do have threaded axles, but im missing a wheel nut, and the axles are too short so if i over tighten it, the wheels dont spin, if i keep it loose, the nut flies off....... yay me...
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler022.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler023.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler024.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler025.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler026.jpg
i used one of the wheel nuts i have as a slipper nut, just for the hell of it lol
Wheels - $8
1 Red Alloy Wheel Nut - $1? seeing as how a full set costs $4? i thought 1 would cost $1
total so far
$146
started with the spacers, starting with the main spacer, the bottom one
layed out on an xmod starter kit box
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler027.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler028.jpg
layed out on the truck wheel wells
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler029.jpg
i removed the rear bed so the rear tower does not hit it and mess up the spacing
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler030.jpg
a dremel and 10 minutes later, i had that, i forgot to take a pic before i marked it with more sharpie
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler031.jpg
i had to cut out the sides for the rear arms to go down
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler032.jpg
all cut out, ready for holes
Xmod Box - $10 (called in radio shack, gave them the xmod item number, they pulled out the SKU's and looked up, the box alone was $10)
Total so far
$156
as time past, a competiton on urc emerged, and now, presenting
Project Ehh V2.187564938475623820383465474
and to be more clear
it's a 2wd $300 limit(electronics dont count) all terrain project, must be finished by august 31st
im planning on making a micro t scale puller, and i can pull my xmods around
i already had a project on it, made it into a hummer, but my f150 has the holes made for a trailer, so im gonna redo everything and put the f150 body on it.. then if i have time, make a trailer.. im just planning out a couple more things(other projects) and then ill start
this is the project as it sits now.. unfinished
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler001.jpg
this will be the new body
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler002.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler003.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler004.jpg
as you see.. it's an xmods f-150 body... its been beat up... beat up real bad...
and i added a towing hitch
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler005.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler006.jpg
some scratches
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler007.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler008.jpg
the rear "roll cage" will go there
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler009.jpg
as u see.. i had lights
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler010.jpg
aaaaaand.. now it's gone.. along with the rear mounts
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler012.jpg
this is how i had mounted the hummer(bad idea from the start.. lol)
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler011.jpg
with the mount off.. this is how it was lengthened
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler013.jpg
the wheelbase difference
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler014.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler015.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler016.jpg
and the rear tower hits the bed, but with the roll cage in place, it should protect it once i make a hole for it to go through(or maybe it might not even go through... maybe a different mounting method will be used
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler017.jpg
that's about it for now... more to come
costs so far
Micro-T RTR - $80
Bearings - $10
3 Racing alloy tranny case with bearings for the spur gear shaft $16
X-Truck Shock Set(the micro-t is using x-truck shocks) $15
F-150 body w/ body kit - $15
Tow Hitch Mod - $1 or use of spares(i used spares that were laying around)
total cost so far: $137
well.. i thought... hell.. i have a full 3 weeks.. why not just play around with it a bit
turned it back into a regular T to drive around
and the reason i say 3 weeks is cause im going to palm springs after this week.. and im staying there for a week.. cutting it 1 week short for me, but ill manage
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler018.jpg
and just for a comparison.. thats how long the body is compared to a stock t
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler019.jpg
:D
update:
got in the DT wheels
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler020.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler021.jpg
i h8 e-clips, i do have threaded axles, but im missing a wheel nut, and the axles are too short so if i over tighten it, the wheels dont spin, if i keep it loose, the nut flies off....... yay me...
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler022.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler023.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler024.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler025.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler026.jpg
i used one of the wheel nuts i have as a slipper nut, just for the hell of it lol
Wheels - $8
1 Red Alloy Wheel Nut - $1? seeing as how a full set costs $4? i thought 1 would cost $1
total so far
$146
started with the spacers, starting with the main spacer, the bottom one
layed out on an xmod starter kit box
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler027.jpg
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler028.jpg
layed out on the truck wheel wells
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler029.jpg
i removed the rear bed so the rear tower does not hit it and mess up the spacing
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler030.jpg
a dremel and 10 minutes later, i had that, i forgot to take a pic before i marked it with more sharpie
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler031.jpg
i had to cut out the sides for the rear arms to go down
http://i326.photobucket.com/albums/k436/hibisi/Micro-t/microscaler032.jpg
all cut out, ready for holes
Xmod Box - $10 (called in radio shack, gave them the xmod item number, they pulled out the SKU's and looked up, the box alone was $10)
Total so far
$156