winners first mini-z project thread

[winner]

well this came in the mail this morning, lol i was not expecting it till friday, but the guy shipped it priority :D

specs:
- pn racing motor pod
- speedy 05 motor
- pn racing king pins
- pn racing front knucles 0'
- pn racing Multi Length Graphite Disk Damper Set
- pn racing tie rod 0'
- pn racing spring set
- pn racing Light Weight 64P Ceramic Ball Diff. Set
- 3010 fets
- pn racing bearings

also included but not installed:
- 3racing motor pod
- aluminum rims
- 4 sets of new duratrax 750mah rechargable batteries (only 3 in pic, other set is on the charger).

basicaly all that for a really good price. i found a track near here im going to try to go up for practice this weekend then watch the races and see what the guy winning has on his car. then probably upgrade it then race the next weekend if i can find a beater body for a decent price, im also useing a team losi mini-t TX because the chassis did not come with one. but i am looking for a stock transmitter. i dont think it was a bad deal, its been used 4 times and only on rcp tracks

well, here's the pics ;)

http://i278.photobucket.com/albums/kk101/suphaterz/011-9.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/013-3.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/014-5.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/016-3.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/018-3.jpg
some other parts that came with it
http://i278.photobucket.com/albums/kk101/suphaterz/017-3.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/018-3.jpg
and pherhaps temperary body setup, i need to figure out how to attatch it on
http://i278.photobucket.com/albums/kk101/suphaterz/020-3.jpg
wheels stick out a little bit
http://i278.photobucket.com/albums/kk101/suphaterz/021-1.jpg

sorry for the crappy pics! im going to stick it on the speed checker one the batts are done

[Stugottz]

a little advice if your going with racing a good starter body is the vette or i found the aston to be good

[winner]

a little advice if your going with racing a good starter body is the vette or i found the aston to be good

thanks man! i've been looking at a FXX because of its width, but i'll look into the vette or the aston. in your opinion what makes them good starter bodies?

[dreamingISdrifting]

...and see what the guy winning has on his car.

he will be driving a MR-03 :lol: :lol: . Nah just kidding :D, I am sure you got all that stuff for a great deal too, I acutally got to drive a Z the other day, now whenever I drive my xmod it feels so heavy and fat...

[winner]

he will be driving a MR-03 :lol: :lol: . Nah just kidding :D, I am sure you got all that stuff for a great deal too, I acutally got to drive a Z the other day, now whenever I drive my xmod it feels so heavy and fat...

lol actually from what i hear a well tuned MR-02 will beat a MR-03 atm until the owner gets it tuned correctly. lol and i know how you feel, i tried driving my gen 1 this morning, it was like watching a brick

[2wdpancar]

lol actually from what i hear a well tuned MR-02 will beat a MR-03 atm until the owner gets it tuned correctly. lol and i know how you feel, i tried driving my gen 1 this morning, it was like watching a brick

Nice mr02 but mr03 is new technology. Most people at my local club all run mr03, which seems faster in the corners. The steering is so much more precise, the car is a lot lighter and the suspension options are very good. I don't think mr02 is worse or better, since at many events people still used mr02 and mr03, both have won races.. it's up to driver preference..me personally, I love the mr03 a lot more than the 02

[winner]

Nice mr02 but mr03 is new technology. Most people at my local club all run mr03, which seems faster in the corners. The steering is so much more precise, the car is a lot lighter and the suspension options are very good. I don't think mr02 is worse or better, since at many events people still used mr02 and mr03, both have won races.. it's up to driver preference..me personally, I love the mr03 a lot more than the 02

the MR-03 is the faster chassis but the reason thst the MR-02 is still able to win races with it is because they are used to the feel and have had more time to tune it and find the fast points, where as the MR-03 drivers are still getting used to the feel and trying to figure out what the best suspension setup is. since this is my first miniz im just going to race it and have fun, if i can pick up a MR-03 for cheap then i will but other then that im going to try to keep around $180 off to the side and wait for kyosho to realease a all new MR series chassis then pre order it. thats probably like 1-2 years from now lol

[Action B]

THe MR-02 is pretty comparable with that double A-arm front that cost like $70 bucks but expect a slight advantage still going to the lighter and more precise MR-03. Without the double A-arm front, its really not on the same level in my opinion. Everyone I know is already well used to the MR-03. It only takes a day or two at the track to transition.

[dreamingISdrifting]

if i can pick up a MR-03 for cheap then i will but other then that im going to try to keep around $180 off to the side and wait for kyosho to realease a all new MR series chassis then pre order it. thats probably like 1-2 years from now lol

Heck I am waiting for the new MA series :nod: :nod: :nod:

[winner]

Heck I am waiting for the new MA series :nod: :nod: :nod:

i'd go with the MR series because they are alot cheaper and less time consuming to set up for track use but i mite pick up a MA later on for drifting around the house ;)

but i got a body! it aint pretty yet but it will be soon :D

here's some pics from the seller, i'll get some myself later
http://farm5.static.flickr.com/4081/4776805753_c305b285fc_b.jpg

http://farm5.static.flickr.com/4094/4776804615_6958b5f6ca_b.jpg

http://farm5.static.flickr.com/4118/4777435268_d03b5b14f1_b.jpg

http://farm5.static.flickr.com/4136/4776802141_12752f07f3_b.jpg

http://farm5.static.flickr.com/4122/4777432598_ff225f7565_b.jpg

enjoy :)

Image brackets broken due to large size. Please remember that anything over 800px wide is not allowed within image brackets.

[okoye]

gotta love my high quality photos :) ill post the smaller resolution for you!

http://farm5.static.flickr.com/4081/4776805753_c305b285fc.jpg
http://farm5.static.flickr.com/4094/4776804615_6958b5f6ca.jpg
http://farm5.static.flickr.com/4136/4776802141_12752f07f3.jpg

[winner]

gotta love my high quality photos :) ill post the smaller resolution for you!

thanks man, just got a few myself, lol i finnaly figured out what my parents did to my camera so they arnt as fuzzy :D


these were the rims that came with it, but i didnt think they were the best loking around
http://i278.photobucket.com/albums/kk101/suphaterz/016-4.jpg

luckily the FXX rims fit perfectly :)
http://i278.photobucket.com/albums/kk101/suphaterz/015-3.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/014-7.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/013-6.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/017-4.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/018-4.jpg
i think it was originally a gloss coat body (lol because it has a clear coat finish) but i need to do some work to get rid of the spider cracks but since its going to be a race body its does not have to look perfect so i mite do something kinda like Dr.K's GT-R. anyone ever seen a riced lambo? :bigwink:

[Bananabrain]

Well at least you got a body now. lol :p

[winner]

Well at least you got a body now. lol :p

lol yea, now i dont have to worry about breaking or bending something everytime i clip a corner :)

but i got a few things in the mail
http://www.egrracing.com/shop/rear-oil-shock-set-p-1914.html
and just for fun later on when this body get retired from the track
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230466988616&ssPageName=STRK:MEWAX:IT


edit/delete thingy:

i was getting rid of them spider cracks and was messing around some, what do you guys think?
http://i278.photobucket.com/albums/kk101/suphaterz/022-1.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/024-1.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/023-2.jpg

im kinda digg'in it myself

[Bananabrain]

A little riduculis, but I think some stacks would do it some good. lol :p

[theoriganalRiD3R1967]

That Lambo looks pretty good in yellow, its unfortunate it has so many scuffs tho, how much did u pay fo r it? and cud u get a close up on the rims that came with it the ones u swapped out?

[winner]

That Lambo looks pretty good in yellow, its unfortunate it has so many scuffs tho, how much did u pay fo r it? and cud u get a close up on the rims that came with it the ones u swapped out?

yea its a really nice looking body, and the detail is amazing. and since its going to be a race body i dont want to go spending tons on paint and since i dont have enough of any color to pait it 1 solid color its going to be a pretty good bit of colors lol. but i got the body for around $20 shipped and here's pics as requested ;)
http://i278.photobucket.com/albums/kk101/suphaterz/001-28.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/002-23.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/003-25.jpg

[okoye]

yeah those rims are coming back to me :D

[Action B]

yeah those rims are coming back to me :D
Are you buying them back or someting? lol

[winner]

WARNING DO NOT SCROLL DOWN IF YOU ARE A RICER!
BUT SRSLY WINNER WILL NOT BE HELD RESPONSABLE FOR SUICIDE DUE TO JEALOUSY
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
^
http://i278.photobucket.com/albums/kk101/suphaterz/005-18.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/004-26.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/006-13.jpg

Q's & C's welcome :D

[winner]

well, here's some of what i've done
the windows were in big need of redoing and i finnaly finished tonight, or well i thought i had finished cause the looked great, then i did some more rubbing and they are perfect!
http://i278.photobucket.com/albums/kk101/suphaterz/012-10.jpg
^ and here's my cheerleader team that kept me motivated and gave me hope and picked me up when i was feeling down while working on the windows

okoyej08 9:42 pm
(9:42:45 PM): sup
winner customs 9:42 pm
(9:42:54 PM): sanding, you?
okoyej08 9:43 pm
(9:43:00 PM): sanding what
winner customs 9:43 pm
(9:43:12 PM): the windows for the merc
okoyej08 9:43 pm
(9:43:26 PM): are you retarded?
winner customs 9:43 pm
(9:43:32 PM): no?
okoyej08 9:43 pm
(9:43:35 PM): why would you sand the windows
winner customs 9:43 pm
(9:43:47 PM): so i can make them look like new
okoyej08 9:43 pm
(9:43:50 PM): lemme not stress this either


and here's some pics of the body as it sits, almost done sanding the paint off... LOL BTW sanding through the clear coat was very hard. the dust smelled like sugar donuts which made my fat self hungary... lol sand 5 mins, eat 15 mins, repeat
http://i278.photobucket.com/albums/kk101/suphaterz/013-7.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/014-8.jpg
http://i278.photobucket.com/albums/kk101/suphaterz/015-4.jpg