August '08-'09 Buildoff 67 camaro aka rustmaro

[2jack3jack]

So here are some before images

after finally getting some money to buy metal

all the welds sanding done by me and the metal fabrication. more if this thread gets approved.

[Donziikid]

Images larger than 800x600 were within [IMG] brackets. The brackets have been removed. You can either leave them as links like they are now or resize them to smaller than 800x600 and reinsert the brackets. Next offense will result in infraction points per Xmodsource Forum Rules and Guidelines.

Cheers,
Kyle.

[texan_idiot25]

I feel your pain, my cab is way beyond my skils. I have to resort to pulling the cab and replacing it with another.

[AJB32690]

found out today that the car is worth 40 grand if I paint it. So im not building the moter

Motor*

Why don't you set the original engine aside, and build another engine? That way, if you ever decide to sell it, just swap the original engine back it.

[2jack3jack]

http://i347.photobucket.com/albums/p446/2jack3jack/2009-08-10120008-1.jpg
http://i347.photobucket.com/albums/p446/2jack3jack/2009-08-10120240.jpg

http://i347.photobucket.com/albums/p446/2jack3jack/2009-08-10120117.jpg

http://i347.photobucket.com/albums/p446/2jack3jack/2009-08-10120152.jpg

http://i347.photobucket.com/albums/p446/2jack3jack/2009-08-10120211.jpg
http://i347.photobucket.com/albums/p446/2jack3jack/2009-08-10120020.jpg

[TheXmodifyer]

Im not so sure about 40 grand.....maybe 30 grand. But keep in mind that just because something is worth 30 grand that doesnt mean someone is willing to give you thirty g's. Anyway looks like an excellent project. Drop a wicked motor in it do some body work make it a driver and a weekend warrior. My buddys got a 67 with a 383 stroker and that baby will GO. Give it a wicked stance with some serious meats.
This stance is incredible..even for a camaro: http://www.dragtimes.com/images/12940-1967-Chevrolet-Camaro.jpg

[supraboi97]

It might be one day but normally the value of classics are like a rollercoaster. They go through a time where the are highly desired and extremely valuable but then they get down alot cheaper the next couple of years. Like mine when we bought it it was worth around 12-13 but now I would be lucky to get 10. And to be honest most origianl cars are worth as much as restomods just depends on the buyer. But anyways it is coming along great and starting to look pretty good.

[texan_idiot25]

Auction blocks are not a measure of a car's value. ;) And number's matching rarely means anything unless the car is rebuilt just like stock. And the market for totally original rebuilds is a strange market, prices go up and down. Your dime-dozen customs fair better. 20s-30s for a solid and well thought restomod. But, you can find daily drivers under 10 grand pretty easy.


http://www.onelapcamaro.com/california/CP%20Shoot%202.jpg
http://www.onelapcamaro.com/california/autocross%201.jpg
That's a 40+ grand car.
http://ls1tech.com/forums/conversions-hybrids/860901-1967-camaro-katech-street-attack-427-a.html

I'd keep the 327, it's different. Plus they are high revving V8s with great power high up. Nice body work so far!

[jimmythekid1]

found out today that the car is worth 40 grand if I paint it. So im not building the moter

Motor*

Why don't you set the original engine aside, and build another engine? That way, if you ever decide to sell it, just swap the original engine back it.


WOW! its an electric Camero! it must be like worth $100k!
:bigwink:

[ling427ttvette]

Auction blocks are not a measure of a car's value. ;) And number's matching rarely means anything unless the car is rebuilt just like stock. And the market for totally original rebuilds is a strange market, prices go up and down. Your dime-dozen customs fair better. 20s-30s for a solid and well thought restomod. But, you can find daily drivers under 10 grand pretty easy.


http://www.onelapcamaro.com/california/CP%20Shoot%202.jpg
http://www.onelapcamaro.com/california/autocross%201.jpg
That's a 40+ grand car.
http://ls1tech.com/forums/conversions-hybrids/860901-1967-camaro-katech-street-attack-427-a.html

I'd keep the 327, it's different. Plus they are high revving V8s with great power high up. Nice body work so far!


I read that whole thread, I'm speechless. My GOD that car is amazing.

[KITT222]

I read that whole thread, I'm speechless. My GOD that car is amazing.

Don't bump old threads

[ling427ttvette]

Don't bump old threads

Ok, first off. There is not even 2 pages of threads in this forum. Second off, this was like 5-6 threads down on this page. Third, why in gods name do you care if an old thread is bumped? Does it affect you? I felt the need to post because that car is an amazing piece of machinery. Fourth, who in the hell are you to tell me what to do?

Edit: AND, tell me how in the heck your post was contributing either? Since you feel the need to make a post in this "old thread" as well.. get off your high horse.

[texan_idiot25]

Don't bump old threads
I'm sorry, I don't see "moderator" anywhere in your title.

[TheB1GDude]

Please read:

http://xmodsource.com/forum/showthread.php?t=17043

For clarification on the bumping of threads.

[2jack3jack]

http://i347.photobucket.com/albums/p446/2jack3jack/2009-12-11214051-1.jpg
http://i347.photobucket.com/albums/p446/2jack3jack/2009-12-11214059.jpg
http://i347.photobucket.com/albums/p446/2jack3jack/2009-12-11214213.jpg

[texan_idiot25]

here are the pics finally. I'm going to replace the carb, I am thinking about a predator carb (if any of you know what that is)
http://i347.photobucket.com/albums/p446/2jack3jack/2009-12-11214039.jpg{/IMG
[IMG]http://i347.photobucket.com/albums/p446/2jack3jack/2009-12-11214051-1.jpg
http://i347.photobucket.com/albums/p446/2jack3jack/2009-12-11214059.jpg
http://i347.photobucket.com/albums/p446/2jack3jack/2009-12-11214213.jpg
sry about the sizez it's not PB is being weird
Sure doesn't look like a high-rise intake to me...

Predators aren't great street carbs. They're basically just a set of flood gates for a race motor that spends most of it's life at WOT :lol:. Very thirsty too, and you'll have to run an open plenum intake if I recall right, so you loose some streetability there too.

[texan_idiot25]

That's what the internet is for. Hell they're everywhere on the Houston Craigslist, I can find'em for 50 bucks. Jegs and Summit have brand new ones for 250ish and for not much more they come in performance versions as well.

They'll perform like a beast and still be decent on mpg.

[texan_idiot25]

Ya I have alway been a huge fan of the q-jet. I'm still looking but I know q-jets can handle 400hp
:bigwink: With a carb that in it's lowest levels flowed 750 CFM, 400 hp is nothing. They need a little work but I've read guys with 700hp motors running these with no problems. Greatest stock carburetor in the world? No doubt. Most misunderstood carburetor in the world? Entirely.

[texan_idiot25]

It runs the throttle response is better than any motor imo lol ah man you guys should hear this car lol

When my friend and I did a motor swap on his camaro, he went from a stock 350 with a tuned 1406 Holly, square bore, to a lightly-built 350 with an Edlebrock Q-Jet. Even untuned he said it is the most responsive carb he's driven, even his carb'd Datsun Z-car wasn't as good as this G-jet. Mine responds better than most 80s, 90s, and a few 00s cars that I've driven.

The reason they get a bad wrap is their complexity and since they are stock carbs, they see a lot of abuse and wear before another person gets it. So their impression of it is based on a carb they don't understand that has been on a car most it's life.. :roll:

Brand new, in a street/strip car, they're hard to beat in their balance of power and drivability.

[Blade.]

I'm sorry, but you have said "Oh I'll get a vid. of it running" like 2 or 3 times now. Your updating this thread with no pictures...

Why even bother putting a post up if there is no valid items that we as a forum can view at. We can't imagine the stuff you put down in your thread. I'm sorry if I'm coming off a little harsh, but all I see is a thread with a few pictures, and posts claiming to put videos up. I see a huge fault in this, no videos and pictures make a boring thread. I'm not sure how you can get comments on your engine, draintrain, body, interior, electrics, or anything unless you post pictures and have a more detailed post afterwards.

Take some thought into your post, yes I know your "updating" this, but truely it looks to me like bumping.

People post to pictures the majority of the time. If you can supply the pictures, people will view your thread more, and post on your thread more.

Pictures pictures pictures.

If you have a cell phone with a camera, who cares if the picture is blurry, send it right to your email addresse' and slam it onto Photobucket! Post it up in here.

It seems like your doing your work right, but I want to hear and see this Camaro run, but I can't without a video.

Blade.

[2jack3jack]

http://i347.photobucket.com/albums/p446/2jack3jack/1261966876349.jpg

http://i347.photobucket.com/albums/p446/2jack3jack/1261966876633.jpg
imo this photo is pure sex
http://i347.photobucket.com/albums/p446/2jack3jack/1261966875849.jpg

[GearHeadV8]

wow man you have come a long way :) congrats.


Sorry but i'm normally with subaru boxer engines so I don't know much but what is the gear drive? it sounds sick tough lol.

[2jack3jack]

http://s347.photobucket.com/albums/p446/2jack3jack/?action=view&current=video-2009-12-30-13-18-05.flv
reved it up a bit

[SPR]

god i lvoe the sound of gear driven :) if i didnt have intentions of FI swap. id go for that set up lol. all the noobys think its super charged :)

oh and cove those poor waverunners up! geez the weather is brutal on them believe me lol.

[2jack3jack]

http://i347.photobucket.com/albums/p446/2jack3jack/2010-01-02162113.jpg

http://i347.photobucket.com/albums/p446/2jack3jack/2010-01-02162157.jpg
http://i347.photobucket.com/albums/p446/2jack3jack/2010-01-02162148.jpg

http://i347.photobucket.com/albums/p446/2jack3jack/2010-01-02162135.jpg

[2jack3jack]

http://i347.photobucket.com/albums/p446/2jack3jack/2010-01-03145041.jpg
my 4bl intake

[Blade.]

She's coming along bud!

Hopefully you can get her done in time eh?

Blade.

P.S. That a Weiland Intake Manifold?

[2jack3jack]

whats new
http://i347.photobucket.com/albums/p446/2jack3jack/2010-01-09165556.jpg
http://i347.photobucket.com/albums/p446/2jack3jack/2010-01-09165606.jpg

[TactiKal]

Coming along very nicely! I had the same intake on my '85 MC SS! good stuff man!

[texan_idiot25]

http://i347.photobucket.com/albums/p446/2jack3jack/2010-01-03145041.jpg
my 4bl intake

Ha, I just sold off a vintage 70s version of that intake

http://67-72chevytrucks.com/vboard/classifieds/data/18/FL000018.jpg

Fairly decent intakes from what I've read, not as good as a modern edlebrock, but good from 1500-6500 from what Weiand told me.

[2jack3jack]

Well I bought a holly 650 for 75 bucks at brass amadilo. I got her in about 10 oclock at night after a bit of slapping around me and my dad got her to work. The carb was use only a couple of time we were told. She idles like a champ tho now you can really hear that cam. http://i347.photobucket.com/albums/p446/2jack3jack/1264301301947.jpg