Action B
03-11-2009, 10:22 PM
I post a lot up on here about Mini-Z's. Let me show you what I play with in my spare time.
This is my project car. I call it Baby Blue!
Setup:
3racing 1 degree knuckles in front
3racing 2 degree knuckles in rear
PN 98mm rear carbongear box
PN 98mm rear alloy bulkhead
PN delrin 98mm Spur (19/29 gearing)
Atomic 19 tooth alloy pinion
Atomic 3.5 offset wheels front, 3 offsets rear
Atomic front lower knuckle holder
3racing front bulkhead
3racing 1 degree front tie rod
3racing 1 degree rear tie rod
Atomic motor heatsink
3racing A2, B2 aluminum motor holders
Orion 750 SHO Nimh Batteries
2X2 stack Fairchild 8858 FETs
3racing steel universal swing shafts
Atomic alloy front differential swing shaft cups?
Atomic alloy ball differential in rear (thrust bearing installed)
Avid bearings from reflex racing
PN 70 turn official Stock motor
Atomic green front springs (stock springs rear)
30 degree atomic tires rear, 40 degree in front
Blue/Grey SP chassis
PN laydown crystal adapter
More to come, this thing isn't quite done yet....
http://farm4.static.flickr.com/3474/3347475483_9c38441258.jpg
http://farm4.static.flickr.com/3469/3347475485_7b6223d62b.jpg
http://farm4.static.flickr.com/3660/3347475491_0f68f609d7.jpg
http://farm4.static.flickr.com/3440/3347475509_d0d17786c4.jpg
Yes, I know the paint may not be the greatest. I did it in a hurry for the Myrtle Beach event and it took some damage during the races. Anyhow, I did pretty good there and got 2nd in the sportsman A-main stock class.
Here is Baby Blue with the rest of the Seven Cities R/C enzos
http://farm4.static.flickr.com/3441/3347475517_b541a3b76e.jpg
This is my project car. I call it Baby Blue!
Setup:
3racing 1 degree knuckles in front
3racing 2 degree knuckles in rear
PN 98mm rear carbongear box
PN 98mm rear alloy bulkhead
PN delrin 98mm Spur (19/29 gearing)
Atomic 19 tooth alloy pinion
Atomic 3.5 offset wheels front, 3 offsets rear
Atomic front lower knuckle holder
3racing front bulkhead
3racing 1 degree front tie rod
3racing 1 degree rear tie rod
Atomic motor heatsink
3racing A2, B2 aluminum motor holders
Orion 750 SHO Nimh Batteries
2X2 stack Fairchild 8858 FETs
3racing steel universal swing shafts
Atomic alloy front differential swing shaft cups?
Atomic alloy ball differential in rear (thrust bearing installed)
Avid bearings from reflex racing
PN 70 turn official Stock motor
Atomic green front springs (stock springs rear)
30 degree atomic tires rear, 40 degree in front
Blue/Grey SP chassis
PN laydown crystal adapter
More to come, this thing isn't quite done yet....
http://farm4.static.flickr.com/3474/3347475483_9c38441258.jpg
http://farm4.static.flickr.com/3469/3347475485_7b6223d62b.jpg
http://farm4.static.flickr.com/3660/3347475491_0f68f609d7.jpg
http://farm4.static.flickr.com/3440/3347475509_d0d17786c4.jpg
Yes, I know the paint may not be the greatest. I did it in a hurry for the Myrtle Beach event and it took some damage during the races. Anyhow, I did pretty good there and got 2nd in the sportsman A-main stock class.
Here is Baby Blue with the rest of the Seven Cities R/C enzos
http://farm4.static.flickr.com/3441/3347475517_b541a3b76e.jpg