PDA

View Full Version : Micro T Electronics


rsx racer
01-31-2009, 08:59 AM
I have a few questions regarding the Micro T stock Electronics.

1) How good are the FETs compared to say, xmod FETs?
2) What is the maximum voltage a Micro T board can take?

fieldfairy2
01-31-2009, 11:28 AM
1)the fets are better than an xmods, since they are a 2x2 stack. they can handle a MICRO T motor of 34t but they would pull less amps, i wouldn't go below 38t. it can easily run a Stock R
2) they should be able to handle 8.4v like any other board but lithium(7.4v, 2cells) is the max anybody has ran on the stock board.

rsx racer
01-31-2009, 11:56 AM
Thanks for everything, that really helped. One more question:
In regards to the motor, I see both a blue and peach-pink wire. Which one is positive, and which is negative?

Thanks again.

fieldfairy2
01-31-2009, 12:16 PM
I think blue is negative and orange one is positive(based on my micro dt motor and setup) but i believe xmod rotate the other way, if that isn't correct just switch the wires around, no big deal. I did it to my track car v2.0.

rsx racer
01-31-2009, 12:21 PM
Thanks again! Thing is, my soldering skills suck, so I just like to do everything correct the first time to avoid screwing up a possible second time...