SPR's New Shop

[SPR]

so xmod4life finally motivated me to get off my butt. ive been wanting to do this for a while, but couldnt figure out what i could build it out of. then tonight i walked into my play room and realised i hadnt thrown out the box my chinchilla cage came in, and the ideas just sparked! so i started the project... heres the pics :)

The Box...

http://a151.ac-images.myspacecdn.com/images01/95/l_f4bcaa07fc22968aaa11dad2cdeab35e.jpg

The Possible Shop Layout.

http://a137.ac-images.myspacecdn.com/images01/94/l_a3f801aaf1cf7c44a8eee4fd230e4a28.jpg

Cutting the Box Down

http://a843.ac-images.myspacecdn.com/images01/111/l_5a798eb62557e57d04024ff10f04ccea.jpg

Building it back up.

http://a99.ac-images.myspacecdn.com/images01/106/l_392f55e19456832b4039ff72d877aa42.jpg

Classic Checker board Floor.

http://a205.ac-images.myspacecdn.com/images01/49/l_ba33a90976ee5c92006eb1ba52f68c4c.jpg

Floor not glued down all the way....

http://a477.ac-images.myspacecdn.com/images01/111/l_c0e798f6861878a783eb5510fa52ff54.jpg

Walls Up.

http://a657.ac-images.myspacecdn.com/images01/101/l_54301d9818093295ce86b1b3ae8478a0.jpg

Front Wall

http://a145.ac-images.myspacecdn.com/images01/6/l_924924d36b8e671e39faedbf0e915b68.jpg

http://a236.ac-images.myspacecdn.com/images01/83/l_ce157a6f431face4c85625c30d657a3b.jpg



of course its not finished yet. thats just as far as i got tonight. ill work on it tomorrow some more... and take some new pics... still to come...

Finish out side parking lot
finish out side walls
finish the floor (glue it down) hopefully fix the bad seam in the middle of it i did a horrible job in lining the pieces up in the middle lol.
need to build a dyno
a lift or two.
add banners to the walls like these...

http://a503.ac-images.myspacecdn.com/images01/27/l_c4fcb0456cfe4aeecc2c874dfd924036.jpg

http://a949.ac-images.myspacecdn.com/images01/73/l_eda303e0ff607cf9aa178e2592e9d94c.jpg

http://a965.ac-images.myspacecdn.com/images01/38/l_efcac8b983784873622874b44b5941f4.jpg

http://a671.ac-images.myspacecdn.com/images01/88/l_a58af063459fce9057f5a2c1ece900be.jpg

kinda going to base this shop off of ralliteks shop (place i use to work)

http://farm3.static.flickr.com/2241/2236927473_cfba5dc3ef.jpg?v=0

http://us.st11.yimg.com/us.st.yimg.com/I/yhst-49187380673845_1992_16203880

cept the only checkers we had was in teh show room lol.

http://farm3.static.flickr.com/2287/2237637612_f3654b94e8.jpg?v=0





anyway heres some random pics of the cars just for fun during the build process.

http://a477.ac-images.myspacecdn.com/images01/111/l_c0e798f6861878a783eb5510fa52ff54.jpg

http://a303.ac-images.myspacecdn.com/images01/21/l_31e8d8d7e4901e989a54864752fa49b6.jpg

http://a168.ac-images.myspacecdn.com/images01/93/l_3864357c88191eee4f95e75f8b83776f.jpg

http://a965.ac-images.myspacecdn.com/images01/86/l_05ed7ab003d74d1258c3ca12e0d23c2c.jpg

http://a503.ac-images.myspacecdn.com/images01/123/l_2bb7cc37c05fe08671b6e9a2e7ac87ee.jpg

http://a202.ac-images.myspacecdn.com/images01/41/l_11caeb1a12fa2331b64915079be43919.jpg

http://a835.ac-images.myspacecdn.com/images01/86/l_ed9fc037408dd5af167ede2b40d0e7d2.jpg

http://a582.ac-images.myspacecdn.com/images01/96/l_d1ffa48e7634e157e2f6383bd383ba65.jpg

http://a640.ac-images.myspacecdn.com/images01/99/l_6c2c2e8f6d2389fb3f66047242984547.jpg


anyway updates tomorrow when i get more done.

[stang_racer]

lol looks good for a cardboard box sweet looking forward to the update lol

[SPR]

well hopefully after its done it wont look like a cardboard box lol

[theoriganalRiD3R1967]

i tried to do thhis once when i was young with those hot wheels cars, t'was my dads idea, but i ended up with hot glue in my hair and multiple burns on fingers, i was gonna try again, but don't know where to put it,

o, and maybe u cud add some vents to walls for some realism, and hang some body kits, just an idea

[SPR]

i tried to do thhis once when i was young with those hot wheels cars, t'was my dads idea, but i ended up with hot glue in my hair and multiple burns on fingers, i was gonna try again, but don't know where to put it,

o, and maybe u cud add some vents to walls for some realism, and hang some body kits, just an idea

i was going to hang a couple hoods actually along with my banners, so were on the same page there! but i dont think ill go as far as bumpers. and vents are just to much work lol.

[Kaze]

I must say this is pretty cool depending how far you go with it, i mean you could make the "managers office", receptionist area, waiting room for "customers" and a few lifts for the cars. Then if you get really detailed even a functioning garage door on the front lol. That'd be amazing and maybe you could set a motor to open and close once a button on the controller is pressed. It looks good SPR, can't wait to see updates and the finished product.

[SPR]

well i will be making lifts, both 4 post and 2 post. i will be making a somewhat functional garage door. it wont be motorized (atleast not any time soon) but it will be there. i havnt really put to much thought about into the show room part, i guess that would be cool touch to display some body kits and stuff maybe? i might add on later. we will see. let me finish the shop first, im going to work on it right now :) exspect updates in the next few hours!

[Jalengrayson]

cool idea

its going to look nice when you get the banners in there

[snowboi1289]

No alls you need is 1 or 2 lifts,and some smal scale tools..

[2wdpancar]

Dude, get a tamiya dyno, rip it apart, and make it smaller, with let's say use a cardboard casing.
Put a fan in the middle, and mount it in the corner of that box.
That would be sweet.:lol:

[Dr. Kustom]

WoW! Looks like a great start right there, can't wait to see more update.

[firebird]

looks really cool, but i dont want to sound like a nerd but did you use a ruler to make the walls, and the front door? Also how did you make the checkered floor?

[4x4Daddy]

Looking good so far and keeps it up great work. I likes your checker floor, lol.

4x4Daddy

[SPR]

No alls you need is 1 or 2 lifts,and some smal scale tools..

lifts are coming, dont worry. im going to build one 4 post and one 2 post atleast. maybe more later. id love to have some mini tool boxes, but no idea where to find them. maybe a doll house store? they have everything.

Dude, get a tamiya dyno, rip it apart, and make it smaller, with let's say use a cardboard casing.
Put a fan in the middle, and mount it in the corner of that box.
That would be sweet.:lol:

thought about that lol. but thats just to much work. and not really worth it to me... i just finished up my dyno, look for the updates below :)


looks really cool, but i dont want to sound like a nerd but did you use a ruler to make the walls, and the front door? Also how did you make the checkered floor?

Heres a break down..

Glue Stick (like u used in 1st grade, no elmers or any other luquid glue will NOT work. it will bleed threw the paper and ruin it.)
Printer Paper (unless you want blue pin stripe wall paper)
Card Board Box
Hobby knife (my box knifes are out of blades)
sissors
sharpie
tape, i used packing tape and electricle tape.
and a yard stick for making straight lines.

i drew the straight lines with the straight edge on the yard stick, used the hobby knife to carfully cut it out (which kinda turned out crappy) used packing tape to hold the box back together. then got on my computer... wiped up a checker board floor in photoshop, printed the design out on 6 full sheets of paper, and patched them together using a glue stick, then glue sticked them to the floor on the cardboard. then i took plain white paper and glued sticked it to the sides for the walls. and i used eletrical tape to cover the edges of the carboard so it looked a little cleaner, and it also kinda played off the checker floor too, kinda like a black painted trim, which i think the idea looks good. but the tape is sorta tacky looking. but its turning out okay for a quick, fun litttle project. its not going to stay this way forever, ill prob rip off all the paper, and actually paint someday when im a little less lazy. also the "banners" are just dont up in photoshop as well printed out, and then placed on a piece of packing tape, and then stuck to the walls. i woulda glue sticked them up... but i ran out and im to cheap to buy more lol. another reason this will get redone in the future...



WoW! Looks like a great start right there, can't wait to see more update.

you asked for it!

Front wall/start of the door.

http://a960.ac-images.myspacecdn.com/images01/75/l_5d803b5a06a82208ca2ca2b15e131e47.jpg

http://a128.ac-images.myspacecdn.com/images01/108/l_e4f930f0a66865f32f14eadec7da5cd7.jpg


of course some will be placed in the parking lot when i finished it, but atleast they all fit in the shop with some spacious room.

http://a479.ac-images.myspacecdn.com/images01/95/l_f920abe50a76dfa56b4a18e1190b6426.jpg


now as i mentioned i wanted a dyno... ive always worked with dyno dynamics, and they really are the best. so naturally thats what i would want in my shop... so i did my best to create one, down to the right color.... heres a pic of a dyno dynamics dynometer. (note the awd one of course)

http://www.dyno.com.au/dyno/modules/home/images/products.jpg

the only thing i forgot was to make the little blue box, which i will be fixing! but man tell me how perfect does this look for being legos :lol:

http://a56.ac-images.myspacecdn.com/images01/12/l_85967612e924220cf681d9453f988a0f.jpg

http://a809.ac-images.myspacecdn.com/images01/76/l_8badb212aad0aaea68e2421f591ba1b0.jpg

http://a980.ac-images.myspacecdn.com/images01/77/l_f5ad35a82ab8ded6e3e4e5240d3aa07b.jpg


anyway i didnt get very far today... but heres 2 other random pictures.

http://a506.ac-images.myspacecdn.com/images01/95/l_bac36629bd188d8b4398594729589211.jpg

http://a913.ac-images.myspacecdn.com/images01/86/l_476cc6a515e406e450e1071e1fb5d968.jpg


im not really liking how its turning out, which is one reason im not putting any money into it... so it will be getting redone... but im still gonna finish it for now, just for fun so i can get an idea what i like, and what i dont like and waht i want to change....

Still to come!

Rolling up and down garage door.
Fans and Computer for the dyno
Lifts
Parking Lot
More Banners for the wall
Suggestions on what else?

[SPR]

Looking good so far and keeps it up great work. I likes your checker floor, lol.

4x4Daddy

thanks :)


oh yeah!! i got these little lego chains... im going to use to tie down the car to the dyno and see if i can actually drive on it or not if its chained down lol. since the wheels on it do roll. it might work if im lucky haha.

[firebird999]

that looks just like my 350z. anyways, nice everythings.

[4G63punk]

****! thats hot! hey id buy that stock sti body off of you. lol its clean.

[Titantaw12]

I like your checker floor. I also like the ramp you made for the subaru and the Enterie is good too. Good Job on the project

[Jalengrayson]

amazing...

did you make the box smaller?
on the previous pictures(before the update) the box looked bigger...

[SPR]

****! thats hot! hey id buy that stock sti body off of you. lol its clean.


HAHAH dont think so. all 3 of my suby bodys are MINT not a single sratch on them, and ill never sell em, keep dreaming and drooling lol.

[SPR]

amazing...

did you make the box smaller?
on the previous pictures(before the update) the box looked bigger...

well between putting more cars, a dyno the front wall, will make it look a lot smaller, but i also took off the parking lot for now too. ill add it back later... but the shop is the szme size other wise.

[Titantaw12]

HAHAH dont think so. all 3 of my suby bodys are MINT not a single sratch on them, and ill never sell em, keep dreaming and drooling lol.



lol. 4G63punk Will be dreaming and drooling. The bodys look great.

[meme405]

Nice brembo sticker...:

http://i149.photobucket.com/albums/s52/meme405/HPIM0217.jpg

But you do realize you are (actually how old are you?) you drive so that makes you at least 16, you have your own car and such, id guess about 20-25. And you are building yourself a garage for RC cars...Just think that its funny, not gonna lie when i first got my xmod, i made something like this but that was 3 years ago and i didnt put this much work into it...

Good work though...

[SPR]

i think i have another suby coming soon too. its a 06 WRC :)

Nice brembo sticker...:

But you do realize you are (actually how old are you?) you drive so that makes you at least 16, you have your own car and such, id guess about 20-25. And you are building yourself a garage for RC cars...Just think that its funny, not gonna lie when i first got my xmod, i made something like this but that was 3 years ago and i didnt put this much work into it...

Good work though...

whoa dude resize the pic lmao.

yes i drive, my brembo's are better :P im 20, and im still a kid at heart. And this really isnt much work... about maybe 1 1/2 hours at max over 2 days...

[Stampedekid]

One word....AWESOME!!!!! Can't wait to see it done! If I ever had time...I'd do this. Also if I had the patience and a big enough box....:lol:

[Titantaw12]

i think i have another suby coming soon too. its a 06 WRC :)

Show some pics if you get it.

[meme405]

i tried too. photobucket sucks man. WTF...how big is it on everyone elses screens it doesnt make a bar at the bottom, isnt that the rule??

edit just read the rules sorry guys...i got it to work however, Oh yeah and what models do you have SPR?

[SPR]

One word....AWESOME!!!!! Can't wait to see it done! If I ever had time...I'd do this. Also if I had the patience and a big enough box....:lol:

at first i was thinking this shop was costing me nothing. just spare stuff i had around the house. but i guess if i didnt spend 150 bucks to get the box, then i wouldnt have a shop. so its costed me about 150 bucks hahaha. drive down some back allys or something, there is always big boxes laying around.

Show some pics if you get it.


http://farm4.static.flickr.com/3212/2356556024_a75d63a0ec_m.jpg

im dealing with the kid right now... i hope i get it, ill be sure to keep it dirty!!!

i tried too. photobucket sucks man. WTF...how big is it on everyone elses screens it doesnt make a bar at the bottom, isnt that the rule??

edit just read the rules sorry guys...i got it to work however, Oh yeah and what models do you have SPR?


ehh well this computer is ***... it might just be me. i need my lap top back sooo bad lol.

what models for what?

[Titantaw12]

Nice subaru Body. thats hot. I know you would sell that one. Thank for the pic.

[SPR]

i hope you ment to type "wouldnt" not would. cuz ill never sell it. im going to rally the living **** out of it lol.

[meme405]

at first i was thinking this shop was costing me nothing. just spare stuff i had around the house. but i guess if i didnt spend 150 bucks to get the box, then i wouldnt have a shop. so its costed me about 150 bucks hahaha. drive down some back allys or something, there is always big boxes laying around.




http://farm4.static.flickr.com/3212/2356556024_a75d63a0ec_m.jpg

im dealing with the kid right now... i hope i get it, ill be sure to keep it dirty!!!




ehh well this computer is ***... it might just be me. i need my lap top back sooo bad lol.

what models for what?

You said your brakes were nicer, are they brembo's or what are they?

[SPR]

oohhh lmao. yeah they are brembos, but i was just messing with you. they are just stock sti brakes. no clue what model number they would be.

[firebird999]

shawizzle! i got the perfect box just now! maybe the april competition can be garages/ showrooms! that would be shaweetz.

[SPR]

shawizzle! i got the perfect box just now! maybe the april competition can be garages/ showrooms! that would be shaweetz.

x2! i like that idea! i better get my butt in gear and make this thing off the concrete hahaha.

[meme405]

Yeah trailers, garages and showrooms, i would like to see that...

[Titantaw12]

woops. Sorry for the miss type. You Wouldn't sell it. lol

[firebird999]

lol, how'd you cut it so smooth? one of my walls is all jacked up, i somehow cut it vertically in half towards the back...

[Stampedekid]

Hey SPR, I found this on eBay, and I know how you want some lifts so here it is
http://cgi.ebay.com/1-24-BATTERY-OPERATED-2-POST-AUTO-HOIST-CAR-MAGIC-LIFT_W0QQitemZ260145715890QQihZ016QQcategoryZ223QQ tcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
What do you think? I thought you would be interested in them. I think I want some.

[fordman239]

very clever, i dont have the time nor patience to even try to do that. it looks great so far. great job.

[meme405]

Who the hell took the time to deisgn that fricking lift, **** they really do have everything on ebay...

[Titantaw12]

Who the hell took the time to deisgn that fricking lift, **** they really do have everything on ebay...

Everything is on Ebay but some people just liketo make stuff themselves.

[SPR]

Yeah trailers, garages and showrooms, i would like to see that...

someone tell a mod that, that would be a good one.

lol, how'd you cut it so smooth? one of my walls is all jacked up, i somehow cut it vertically in half towards the back...

did it very slowly. stick the knife clear threw, then slowly rock it back and forth cutting just little piece by little piece.

Hey SPR, I found this on eBay, and I know how you want some lifts so here it is
http://cgi.ebay.com/1-24-BATTERY-OPERATED-2-POST-AUTO-HOIST-CAR-MAGIC-LIFT_W0QQitemZ260145715890QQihZ016QQcategoryZ223QQ tcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
What do you think? I thought you would be interested in them. I think I want some.

pretty sick! but way to big for what i want. would just take up to much room. and i really dont care if it worked or not, its always going to be up. so yeah. but thanks for lookin out!

very clever, i dont have the time nor patience to even try to do that. it looks great so far. great job.

Thanks

i started on the driveway last night... it didnt go over so good. so ill get back to work on it sometime later when i got the time.

[firebird999]

did it very slowly. stick the knife clear threw, then slowly rock it back and forth cutting just little piece by little piece.

ohhhhh.... i used scissors...

[theoriganalRiD3R1967]

scissors are good for a lot of stuff but when i work with card board i like to use a knife to, with scissors its always bumpy for me, this would be a real cool contest this or an open class one!