PDA

View Full Version : greenday crawls again?!


greenday
02-21-2008, 12:47 PM
Hello fellas:

Most of you haven't seen anything crawl-related since my "Lifted Lux" Escalade project, which never really took off. Unable to live without a crawler, I started refining by existing crawler. The huge, gawky Futaba S3003 was pitched for a smaller, Hitec Hs-55. Next, the trans was rebuilt with all new parts with locked front and rear differntial. The batteries were relocated, and the whole truck was overall cleaned up. The slammed rims were coated with silver for a neater look, and anything weak was either replaced or re-worked. I just tested it to see what had come of my truck, and I was delighted to see my forward action was up to par, as it had been lacking before. (Gears slipped constantly) However, my reverse was seemingly non-existent. I have located my problem to be where I drilled the POT shaft too much, allowing the final gear to wobble or not swing in a circle, causing problems with gear mesh. I am not to upset with weak reverse, but I would prefer having it, as it is useful on the trail. If you can help me any on this matter, it would be greatly appreciated. I have ordered a 1984 GMC Pickup truck, and some Aoshima Super Swamper tires with Pentacle wheels. I am using these with my truck to create one similar to Xmodification's. However, it will be much different, in the paint-scheme. I plan on a color from Dupli-Color, so I have an authentic vehicle. Here are some chasiss pictures for you to enjoy and discuss.

Thank you,
Tyler Walker

http://i228.photobucket.com/albums/ee316/acerguy/101_1170.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1171.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1173.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1176.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1172.jpg

clintr79
02-21-2008, 12:52 PM
Looks good what was wrong with the bigger servo?Also why did you use tape on the wires and not heat shrink?Or is it just temporary?

greenday
02-21-2008, 12:59 PM
To ansewer your questions:

1.) The first servo was fine, and it worked well, but the sheer size of it limited me to large SUV bodies with no interiors. I wanted something I could fit a body over.

2.) I want heat shrink, but this is all I had. I will probably pick up some next time I go to RS.

EDIT:I just got off the phone with my awesome Uncle Dennis, and he has notified me that he can also get an Aoshima 4runner kit, so this will be another set of aoshimas and another porject body, so this is like 2 projects in 1.

EDIT: Yet another edit, but heres a video!

http://i228.photobucket.com/albums/ee316/acerguy/th_101_1181.jpg (http://s228.photobucket.com/albums/ee316/acerguy/?action=view&current=101_1181.flv)

fieldfairy2
02-21-2008, 05:10 PM
Nice, sounds cool. My crawler would have been stuck on the rock because i didn't flip the batterycase. Overall i think it will be cool.

greenday
02-22-2008, 07:07 AM
thanks, any idea on why my reverse strains my servo soooo bad?

Lowrideit
02-22-2008, 10:26 AM
Battery Reloaction Working good for you?
I like it, What body do you have for it?

Donziikid
02-22-2008, 10:50 AM
thanks, any idea on why my reverse strains my servo soooo bad?

Could you elaborate on this? Do you mean it just doesn't go as fast in reverse as it does in forward or is it not moving at all in reverse?

Stampedekid
02-22-2008, 11:54 AM
Nice Greenday! I like this project. Once I get my XMOD a servo motor mod, I'll be crawling good too!

djking
02-22-2008, 12:26 PM
same i have 6 servos on the way......make soem winches:p

greenday
02-22-2008, 02:30 PM
Could you elaborate on this? Do you mean it just doesn't go as fast in reverse as it does in forward or is it not moving at all in reverse?


It strains it immensly, causing it to bog down way too much.

SUPER EDIT: Painted, half mounted, interiored, all kinds of other goodies:

EDIT: Ok guys, I just got 2 cans of Dupli-color paint today. I believe my uncle is getting the 4runner (or has gotten) model today. I am planning on blue pearl for the 4runner, (even if its not an XMod) and red pearl for the GMC. They might not be entirely authentic, but I think they will look really trick. I might do some silver accents here and there, but IDK yet. I can't wait to get them, they should be here in a few days. I also testd my crawler on some "real" terrain, i:e: a rock face that I previously struggled to climb, and I went right up it with low batteries, so I am really pleased. I stilldon't have much reverse, but heck, good drivers don't need reverse!!!lol.

EDIT: Another one..got home and found my GMC and tires, and got to work. Got int. chopped mounted. Got bed chopped for articulation. Turns out uncle wants me to build them both as models...too late lol..But it'll look nice, so it wont matter:

http://i228.photobucket.com/albums/ee316/acerguy/101_1186.jpg

odd curve...melted?

http://i228.photobucket.com/albums/ee316/acerguy/101_1187.jpg

color is autmn maple metallic from duplicolor/

NO ONE CARES!!! :( Updates:

http://i228.photobucket.com/albums/ee316/acerguy/101_1210.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1209.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1208.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1200.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1192.jpg

NO ONE CARES!!!:cry: :cry: :cry:

I should just quit....lol....

http://i228.photobucket.com/albums/ee316/acerguy/101_1220.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1214.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1216.jpg

greenday
02-27-2008, 07:32 PM
Sorry for the double post, but I asked and RedSXmodder gave me the good-to-go and I really wanted people to see my work. I have the grille detailed, the body close to being fully mounted, and I am doing things here and there. This, I believe, has been my best project ever. So, here are the looks-like-its-done-but-its-really-not-pics:

http://i228.photobucket.com/albums/ee316/acerguy/101_1231.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1233.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1230.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1232.jpg

http://i228.photobucket.com/albums/ee316/acerguy/101_1237.jpg

fieldfairy2
02-27-2008, 07:53 PM
Looks good man. I like the color. THe rims arn't bad either. Overall it is pretty cool! Keep us updated.

greenday
02-27-2008, 09:13 PM
I think I am going to paint the yello lenses orange as they should be...turn signals..I also need to finih it and comb through it and fix imperfections, and refine it. I am going to take my time so I can have a crawler that goes as well as it looks.:D

RedSXmodder
02-27-2008, 09:48 PM
Wow! How come I didn't see this before? It looks great! The red is perfect!

Later,
RedSXmodder

greenday
02-28-2008, 07:29 PM
Wow! How come I didn't see this before? It looks great! The red is perfect!

Later,
RedSXmodder


lol, this is what I was aking about, and I bumped it, so YOU could see it! lol:D

Also I need a new motor cradle/rear end....

Ducroix
02-28-2008, 08:07 PM
Very nice, those rims look real good.

Lancer_Man
02-28-2008, 10:27 PM
Nice!

The red was a great choice, looks sweet.

Also, nice rims!

-LM

texan_idiot25
02-28-2008, 10:31 PM
Pretty *****in' so far :nod:

greenday
02-29-2008, 04:05 PM
Pretty *****in' so far :nod:

My thoughts exactly..I need a new rear end now...

fieldfairy2
02-29-2008, 04:48 PM
What happened with the motor cradle/rear end? Looks good. I wish i had time for my crawler and money.

greenday
02-29-2008, 05:08 PM
Servo mysteriously puts out way less power than it should, and the motor cradle is trash. I am going to (hopefully) sell a couple things and maybe trade for the nesecary parts. 100 post...woohoo...pffftt

Lowrideit
02-29-2008, 05:17 PM
wow that thing is really nice.
Keep up the good work,
Nice crawler.

youngxmodder
02-29-2008, 07:47 PM
nice body color and how did u make those beadlocks?

greenday
02-29-2008, 07:56 PM
I made them by:

1.) Gathering (4) G35 rims and (4) truck rims.
2.) Boring hole out of truck rims, then cutting ribs or excess plastic off. I sanded the lip and painted red, then trimmed up a G35 rim and pressed it in..:D

I WANT A MOTOR CRADLE DANGIT!

Titantaw12
02-29-2008, 09:06 PM
I like the wheels on that truck.

greenday
02-29-2008, 09:14 PM
Thanks dude, anyone else think I should drill/paint the rims to have a "beadlock" look?:-?

Titantaw12
02-29-2008, 09:19 PM
Nice Collection. Nice GMC

greenday
02-29-2008, 09:22 PM
Thanks dude, but just for safety's sake, (and I know you mean well) but try to make your posts a bit longer, so you won't be getting into trouble. Just add a little more "stuff" to your posts. Thanks for comments btw!:D

Titantaw12
02-29-2008, 09:24 PM
nice back part thuogh

greenday
02-29-2008, 09:36 PM
Thanks, but what do you mean by "back part"? The bed? Should I add a rollbar?