My Micro-t BRUSHLESS!

[2wdpancar]

so guys and girls
today i decided i would respray my micro-t body
i have cut out the back windsheild to i can acsess the battery wires easy...to charge w/ the body on
i ahve sanded down the edges...and a few other places skirts edges and i took of all the stickers
i plan to make my micro-t a racer, so i lowered the rear w/ stock springs and in the front i currently run evo truck xmod yellow springs...whcih ill get the stock evos out probably...this is to lower the chassis
then a white and black spray job for the body... a few cut-outs and it will look like a racer...not mcuh of a little stadium truck anymore

ima spray when my pops goes to work...so i can spray in my room instead of my back alley
so ill get up pics then of my mods
for upgrades ill ahve:
atomic bb motor
team losi li-pos


red evo truck springs in front, stockies in rear
and probably ill pick up an aluminum motor palte at my local hobby shiop when i get over there

thanks for looking...id like suggestions as far as they could go...not asking what to do

UpDaTe: just masked off body, ready for the white paint tomorrow then ill get up pics after its done drying

srry bout that civic-guy
ill just edit the post next time

ok guys and girls jsut got finished painting the body
not the best, but it adds some character to the little thing
will post up pics in a bit

UPDATE:

well, i finally got pics tonight.
i installed an aluminum piece, i cant remember what it's caled(it holds the axle...)

Specs:
new paintjob-new body soon(pan car)
a lot of aluminum-motor plate, shock towers, a-arms
threaded front/rear shafts
10000kv brushless system w/ counter-parts and esc-very soon, near xmas

pics:
http://i144.photobucket.com/albums/r198/blt45/IMG_0851.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0852.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0853.jpg

i will have more on later, when i get parts.
Thanks,
Blt

GOTTA LOVE LIFE, JUST GOT BRUSHLESS POWER BABY OF 10250KV YAY!!!!!!
http://i144.photobucket.com/albums/r198/blt45/IMG_0160.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0163.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0167.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0170.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0177.jpg

JUST NEED MY LIPO, HS-50, AND JR RECIEVER!!!!!!!

[Most_Wanted]

Congrats on the BL.

Which JR receiver are you getting for it? If you go with a JR sm22 servo it's a direct fit, I think the HS-50 is longer so you'll have to do some chassis hacking to get that one in there.

Also, in the first of your post you mentioned that you charge the battery in the car. That's not a good idea at all, I've seen where guys have overcharged and nearly destroyed their trucks by doing that. Even worse if you go lipo.

Just a suggestion though.

[Stampedekid]

Congrats on the BL system. Getting one soon for my Micro DT. You just gonna keep it flat white? No graphics, 2 tone, anything?

[REDisFASTER]

Who makes your BL motor? Is it the Losi one or someone else, like Feigao?

Also, nice G7. I've got the wired version (G5)

[Stampedekid]

Who makes your BL motor? Is it the Losi one or someone else, like Feigao?

Also, nice G7. I've got the wired version (G5)

Its by Xceleroin. I am getting one for my DT.

[mustanglover]

aka losi makes it.
but what did you do to that body, red windows??? not trying to be mean.

[Stampedekid]

aka losi makes it.
but what did you do to that body, red windows??? not trying to be mean.

Maybe its window mask..

[2wdpancar]

Congrats on the BL.

Which JR receiver are you getting for it? If you go with a JR sm22 servo it's a direct fit, I think the HS-50 is longer so you'll have to do some chassis hacking to get that one in there.

Also, in the first of your post you mentioned that you charge the battery in the car. That's not a good idea at all, I've seen where guys have overcharged and nearly destroyed their trucks by doing that. Even worse if you go lipo.

Just a suggestion though.

Yeah, HS-50.
Thanks man..about the lipo...I don't plan charging THAT one inside the car:lol:
Sorry for all the crap I gave you.

Congrats on the BL system. Getting one soon for my Micro DT. You just gonna keep it flat white? No graphics, 2 tone, anything?

Eh...yeah....there's a whole bunch or stickers.
It's gunna get scratched up anyway.
No front suspension and yellow EVOT springs rear:nod:
Who makes your BL motor? Is it the Losi one or someone else, like Feigao?

Also, nice G7. I've got the wired version (G5)

The company starts with a Ver something...
Not Feigao...
Thanks, I love it, but it lags like crazy sometimes
Wireless:lol:
Its by Xceleroin. I am getting one for my DT.

Maybe its window mask..

Yeah, what he said.
Window mask?
What the heck are you talking about>?:lol:
aka losi makes it.
but what did you do to that body, red windows??? not trying to be mean.

It's cool.
This was one of my first paint jobs...I'm more keen on performance than on paint...since the paint will scratch.
I kinda like it like this...I might grab a pan shell, and paint it flat black:nod:

[REDisFASTER]

I think the body used to be red, then he painted the white over it

[xmodificationer]

dude I charge my lipo in my micro-t. Its fine and it uses a smart charger. No worries you cant overcharge.

[Stampedekid]

Yeah, HS-50.
Thanks man..about the lipo...I don't plan charging THAT one inside the car:lol:
Sorry for all the crap I gave you.



Eh...yeah....there's a whole bunch or stickers.
It's gunna get scratched up anyway.
No front suspension and yellow EVOT springs rear:nod:


The company starts with a Ver something...
Not Feigao...
Thanks, I love it, but it lags like crazy sometimes
Wireless:lol:




Yeah, what he said.
Window mask?
What the heck are you talking about>?:lol:


It's cool.
This was one of my first paint jobs...I'm more keen on performance than on paint...since the paint will scratch.
I kinda like it like this...I might grab a pan shell, and paint it flat black:nod:

Ooh, have you tested it yet? How's it perform?

[2wdpancar]

No dude.
The guy who works at the shop called my house...telling me my JR reciever was in, and my hs-50.
I still need to get the lipos in...I;m going tomorrow to pick it all up.

SWEET, I might get to drive it tomorrow if it's in!!!!
Wait, I still have my nimh pack...SICK.

Most Wanted, my TX is a JR XR2i.
:bigwink:

[Stampedekid]

No dude.
The guy who works at the shop called my house...telling me my JR reciever was in, and my hs-50.
I still need to get the lipos in...I;m going tomorrow to pick it all up.

SWEET, I might get to drive it tomorrow if it's in!!!!
Wait, I still have my nimh pack...SICK.

Most Wanted, my TX is a JR XR2i.
:bigwink:

Sweet, I am getting my BL system next month! Or on Sunday.

[2wdpancar]

Sweet, I am getting my BL system next month! Or on Sunday.

get the 10250 kv motor...trust me 10 more bucks...it'll be worth the dough...:nod:

[xmodificationer]

yea like the couple hundreds dollars... anyways how the hell do you get all this **** money xmodracer. Im gunna start living with you

[2wdpancar]

yea like the couple hundreds dollars... anyways how the hell do you get all this **** money xmodracer. Im gunna start living with you
Ya know, people get down on the streets...dealing on the corners...
Maybe you should do a K-9 Test to see if he sells crack:lol:

[2wdpancar]

Here are some new pics of it...
Got in my JR Recieve,r HS-50 Feather, and xtals.

Need my lipp and an ew servo horn, then the guy at my lhs is going to put the horn on the feather...you need to cut it like a hex...

PICS:
http://i144.photobucket.com/albums/r198/blt45/IMG_0203.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0204.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0205.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0206.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0207.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0208.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0209.jpg
http://i144.photobucket.com/albums/r198/blt45/IMG_0210.jpg

[xmodificationer]

why did you get such a big receiver?

[2wdpancar]

I didn't know it was going to be this big.
O well, I could care less.:lol:
Plus, I already had an AM JR Racing TX.
Didn't wanna spend more on a Futaba TX.

[mustanglover]

looks like a huge turd!

[2wdpancar]

looks like a huge turd!

Thanks alot.:roll:

[xmodificationer]

Losi Mini Reciever (From a mini baja) << should have got that. See:http://www.microtforum.com/forum/viewtopic.php?t=1625

[mustanglover]

well it does the body won't even fit on!

[2wdpancar]

Losi Mini Reciever (From a mini baja) << should have got that. See:http://www.microtforum.com/forum/viewtopic.php?t=1625

O well!
Too bad...it's fine..

well it does the body won't even fit on!

Who cares if the body doesn't fit?
It's secure...that's all I care about.

[xmodificationer]

O well!
Too bad...it's fine..



Who cares if the body doesn't fit?
It's secure...that's all I care about.

you will when you flip it the body goes flying and you tear up your esc.

[2wdpancar]

you will when you flip it the body goes flying and you tear up your esc.

Ugh well there's going to be electric tape on it...it's won't rip.
Did you see it in real life, it's tough!:nod:

[xmodificationer]

so what i would spend hundreds for a scratched to hell RC car.

[2wdpancar]

so what i would spend hundreds for a scratched to hell RC car.

Ok.......
That's nice man...
Even if this things gets dings and scratches, I could care less it's a new basher...:nod:

[Sweed]

you will when you flip it the body goes flying and you tear up your esc.

You've had a MC-T flip on the road? Yah, right.

[2wdpancar]

That would be rather hard...I've flipped mine w/ EvoT medium suspension...that's a diff story..