Firelap 02 EB on xmods evo

[jollyboss]

Hello!
I've done this mod,taking idea form the tutorial on AM,where they put a kyosho EB on xmods evo.
As written by MK2compressor on another forum,I soldered a resistor on the potenziometer wires(brown and blck soldered together)to get full steering range.
The problem I had is that servo seems trembling.
I used a 220 Ohm resistor,is it ok?but i Don't think that the problem could be caused by a wrong resistor...
Thanks!

[Sweed]

What voltage are you running?

[jollyboss]

stock 4,8V...ph2t(the nelly master)told me to not go over on an Iwaver/firelap EB,anyway it seems a servo centerign trouble

[Mooshu_Beef]

That might the a resistor problem. I believe the servo is having trouble centering because of the extra voltage it is getting. Have you tried using the servo on the wires just straight from the Firelap to see how far it turns?

On a Gen 1 chassis I use 3.3Kohm resistors--you can see my tutorial in the modification section in PDF Form.

Let us know and details :D